UG Community @ Ultimate-Guitar.Com

UG Community @ Ultimate-Guitar.Com (
-   Electric Guitar (
-   -   Information on down tuning (

t1mman 10-23-2012 08:43 PM

Information on down tuning
Ok, basialy if I get this right, any instruments would be able to "take" Down tuning with the right tenssion.

Following this guide:

if I currently have, lets say, an RG350 (Floating bridge, 25.5 scale), go from standard tuning using an EXL110 (10-46 stings) , change them for a kit of EXL156 and tune it in Baritone (B tuning, 3 step down) it should take it "just as well".

Surely, I'd have to adjust the spring tension, intonation, would I have to adjust the truss rod also?

Anyone can tell me if that would cause any issue on the long term?


jeleopard 10-23-2012 08:51 PM

Probably not the truss rod.

But yea. The baritone set works fine.

Robbie-G 10-24-2012 01:24 PM

Should work just fine, probably won't need a truss rod adjustment, but if your not comfortable with setting it up just bring it to a good tech to take care of and you should be good to go.

All times are GMT -4. The time now is 12:06 PM.

Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.