UG Community @ Ultimate-Guitar.Com

UG Community @ Ultimate-Guitar.Com (http://www.ultimate-guitar.com/forum/index.php)
-   Gear Building & Customizing (http://www.ultimate-guitar.com/forum/forumdisplay.php?f=53)
-   -   Looking to Build a 1w "Bedroom" Tube Head; Suggestions? (http://www.ultimate-guitar.com/forum/showthread.php?t=1575933)

Agent51 12-02-2012 02:28 PM

Looking to Build a 1w "Bedroom" Tube Head; Suggestions?
 
So I've been looking at those 50th Anniversary 1w Marshall heads pretty much all year now. I REALLY want the JCM-1, but I just cannot bring myself to pay $800+ for a 1w head that will most-likely never ever be used outside of home practice (I have a JCM-800 and MOSFET Lead 100 for band practice/gigging/recording). I love the tone that little amp cranks out though, especially when you use te boost and roll the preamp up, very "Jubilee"-esq.

So my question is, are there any DYI kits out there for this? Not necessarily that are clones of the JCM-1, though that'd be excellent, but just a very low wattage kit that gives me the JCM/Jubilee tones. I've been wanting to take on an amp build for awhile and a small 1w-er would be perfect, cause if I screw up, it's just a bedroom amp anyway so no biggie. I live in an apartment so I can't crank the high watt 800 to the level it needs for that classic distortion, but those little 1w guys sound AWESOME at low volume.

Also, what should it pair with in terms of speakers? I've got an Avatar 2x12 that has a greenback and an H-30 in it, so a 25w and 30w speaker. I ordered that when I got my MOSFET because I wanted a home-use cab that could also be a live backup (hence not just getting a 1x12, as I use a 4x12 live). Now the MOSFET stays at the practice space too so I need something for home, that isn't my crappy MG30FX lmao. Would my Avatar be fine, or should I build it a 1x12 with something? The avatar can isolate speakers too. I think it's 16ohms stereo and 8 mono, or the other way around? I always get those two backwards and I'm not home to just look at the jack plate on the cab.

So yeah, any suggestions for either an existing, and "cheap" (not more than a few hundred, as it's just for messing around at home when not at the rehearsal space), very low-watt tube head, or a clone/DIY kit, that has the JCM sound?

roaddawg07 12-02-2012 04:16 PM

https://www.google.com/#hl=en&sugex...iw=1347&bih=639

Agent51 12-02-2012 07:01 PM

The point was to get suggestions of specific ones from user experience, not the classic douchey "google it" Internet response.....

ProphetToJables 12-02-2012 07:19 PM

ampmaker.com if you're in the UK, they're supposed to be pretty good.

R45VT 12-02-2012 07:19 PM

Quote:
Originally Posted by Agent51
The point was to get suggestions of specific ones from user experience, not the classic douchey "google it" Internet response.....


Don't call him a douche for helping you. Maybe he didn't know of a 1w that he could recommend and just give you a free bump.

Hopefully no one helps you now.

ranga97 12-02-2012 08:32 PM

To get started you can build simple 1 watt ruby amps from runoffgroove.com
I built one with a tonestack and gain section and it cranks a mighty 1 watt. Cheap and great to start getting into building stuff.
My build sounds very marshall-y and sounds great, gets more use than my fender tubes :)

edit: Low voltage and low risk too. High plate voltage and stored currents in caps deliver a mighty shock in tube amps ;)

sethasaurus 12-02-2012 08:51 PM

I know Vox makes a little 4W head at a low price. It has an attenuator for 1W or 1/4W output too.
Can't tell you what that particular one sounds like but the Vox gear I have used has always been really good.

If you want to build your own, ax84.com is really useful. You should check out the 1W Firefly amp:
http://www.ax84.com/index.php/oldpr...ject_id=firefly

Agent51 12-02-2012 09:19 PM

Quote:
Originally Posted by R45VT
Don't call him a douche for helping you. Maybe he didn't know of a 1w that he could recommend and just give you a free bump.

Hopefully no one helps you now.


He didn't "help me", he posted a link to a google search for low watt amp kits, which is obviously a search I can, and have done, myself. Im not questioning their existence, if I were, than his link would have "helped". I'm question kits with particular characteristics and looking for feedback on them. So yes, the fact that his post contained NOTHING other than the link to a generic search term result makes it douchey.

To everyone else, thanks for the info and suggestions on different heads/kits. I'm gonna look into that Vox suggestion, I didn't know they had a 4w head. I've heard good stuff about the blackstar ht-1 but I thinks it's a little more "crunchy" than I'm looking for, at least from demo vids I've watched, and lack of B/M/T controls is very odd to me.

R45VT 12-02-2012 09:31 PM

The BlackStar is not fully tube. A bunch of SS crap in there.

Sounds like you don't want it anyway but I wanted to get that out there.

Arab_Philosofer 12-02-2012 09:39 PM

I know what you mean man, searching google brings so little help on this subject. I was search g for a while until I came upon some good stuff

Ax84.com you should check out.
Also the DIY ones some guy made and gave out the layout, the "Superfly" and "Murder One".
I think I'm gonna start building one of those.


All times are GMT -4. The time now is 02:28 PM.

Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.