06-12-2012, 10:44 AM
|
#1 |
|
Registered User
Join Date: Aug 2008
|
Combo to head conversion
I have a line 6 flextone 3 unit (combo no speaker) I can run this through a cab using the headphone out but i don't know whether I'm compromising volume or wattage as it doesn't get very loud, I tried to wire a mono 4 pin jack to the connecting speaker wire but I get no sound from the cab when this is plugged in, could anyone give me any advice on how to wire the jack correctly, I have two speaker cables and a mono 4 pin jack out
|
|
|
|
06-12-2012, 10:54 AM
|
#2 |
|
Registered User
Join Date: Dec 2008
|
You have to run it into a cabinet through the speaker out, not the headphone out.
|
|
|
|
|
06-12-2012, 11:45 AM
|
#3 |
|
Registered User
Join Date: Aug 2008
|
There isnt a speaker out, it's an early model I attached a mono 1/4 jack with 4 pins to the speaker cable but I'm not getting any sound from it
|
|
|
|
|
06-12-2012, 02:54 PM
|
#4 |
|
Registered User
Join Date: Feb 2003
Location: ontario
|
something doesnt sound right here. there should always be a speaker out. also, "mono" and "4 pins" don't quite go together.
maybe you could give a little more information. some pictures would be very helpful.
__________________
Q: What's worse than lobsters on your piano? A: Crabs on your organ. |
|
|
|
|
06-12-2012, 03:34 PM
|
#5 |
|
Registered User
Join Date: Aug 2008
|
I cant post any pics at the minute but this is the jack I got
http://mobile.maplin.co.uk/module.aspx?moduleno=1298 Which I soldered to the speaker cable There is a speaker cable which was attached to the speaker when it was a combo but there was no extra out for a cabinet, for some reason the cab works through the headphone socket (which even I was surprised at) but I wanted to turn the old speaker cable into a work extension can socket Last edited by harris.tom85 : 06-12-2012 at 03:52 PM. |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Rate This Thread | |
|
|
All times are GMT -4. The time now is 10:01 PM.