nowa90

Well, as some of you may have noticed is that I took quiet the internet break, and in the 2 weeks I've pumped up almsot two guitars, this is one of them. The other (superstrat) just needs the bridge posts and tuners drilled, which I'll do eventually.
The camera was gone for most of the time, so I was only able to snap these pics now, and one with an iphone a bit back.

SPECS
Body Shape: Les Paul Double Cut
Hardware Colour: Chrome

Neck
Construction: set
Tuners: grover sta-tites, 18:1
Nut size/material: bone, 44mm
String Spacing: 7mm
#of frets: 22
Neck wood: wenge/padauk/wenge
Fretboard: rosewood
Scale: 24 3/4
Radius: 12
Headstock shape: wave
Headstock Angle: 13
Bindings: n/a
Inlay: pearloid dots, 4mm
Finish: tung oil, gloss

Body
Wood: Spanish cedar, mahogany top
Contours: arm, belly
Bindings: n/a
Bridge: TOM string thru, black ferrules
Strap Buttons:chrome
Finish: tung oil, poly - gloss

Electronics
Pickup Config: 1 Humbucker
Bridge: GFS Dream 90
Pickgaurd: black plastic
Switch: n/a
Controls: 1 vol 1 tone
Control Cavity Material: plastic
Knobs: black speed


Top wood (cut from same board)

Before it got the logo, and bridge recessed

Headstock

Front

Back

Complete, with 2 oil coats on


Enjoy!
Total time was about 80 hours or so, without sanding

__________________
Just call me Julius, J, etc.
Taking an Internet break for a while, will come on when I can.
Current project: LP DC JR build
My completed guitar builds.

whoomit

You should make a nice wooden pickguard. You know it makes sense!

Anyway, looks great. Can't wait to see it with hardware

nowa90

hmmm, i do still have some of the wood left with the same grain, and I was thinking of making a new one. Thanks for the idea.

__________________
Just call me Julius, J, etc.
Taking an Internet break for a while, will come on when I can.
Current project: LP DC JR build
My completed guitar builds.