Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  
Password
Search:

Reply
Old 08-17-2012, 01:04 AM   #141
Loki.Foxchild
Registered User
 
Join Date: Jun 2012
Quote:
Originally Posted by SamPingas
Hello everyone!

The wiring in my Squier J bass is kind of different compared to that of the standard jazz bass. I know that I need some 22 AWG stranded wire, as well as an SPDT switch, but where I should wire the killswitch to is very confusing to me. Somebody on talkbass told me to wire my killswitch to the red wire connecting the master tone and output jack, is he correct?

(Top circle is neck pot, middle is bridge pot, bottom is master tone)

[clipped]

If somebody could guide me through this that would be awesome!

I'm not sure if this is the only thing that would work, but I think you could take a SPST switch (or two lugs of a SPDT incl. the common lug) and solder one lug to the hot and one to the ground of the jack or the wires coming from the jack. I've only seen this done with momentary switches, I think, but it might work for a toggle too (might want to try to find this out though). Also, I'm not sure if you can put in the anti-pop resistor with this, but I think you could....
Loki.Foxchild is offline   Reply With Quote
Old 08-17-2012, 09:19 AM   #142
evhbrianmay
Has a Pet Whale
 
evhbrianmay's Avatar
 
Join Date: Dec 2009
So, I'm wanting to wire an On-off-on switch as a killswitch to get super fast stutter, anyways...

So I'm guessing the way to do this is to simply wire it up like this:
Hot->1
To output(tip)->2
Hot->3

And then have a grounded washer on the switch.

I'm guessing it will only be grounded in the off position when I touch the switch, am I right?
__________________
I'm up for building you a pedal.
(Or modding nearly anything moddable)
(PM Me.)
evhbrianmay is offline   Reply With Quote
Old 08-19-2012, 03:20 PM   #143
evhbrianmay
Has a Pet Whale
 
evhbrianmay's Avatar
 
Join Date: Dec 2009
This right here:
http://www.ebay.com/itm/Lever-Switc...#ht_1101wt_1037

That would work as long as one of my hands is touching the ground, correct?
__________________
I'm up for building you a pedal.
(Or modding nearly anything moddable)
(PM Me.)
evhbrianmay is offline   Reply With Quote
Old 08-27-2012, 03:05 PM   #144
drmarble
Registered User
 
Join Date: Aug 2012
Quote:
Originally Posted by Phoenix V
Been getting into installing a killswitch on some of my guitars. With killswitches, for the love of god use something that looks good with the guitar. You can keep your ******* oven toggle switches or Buckethead big red clown buttons.

This is what I ended up using. Low profile, normally open, push to close contact, sleek and sturdy. MTBF is 100,000+ cycles. It's out of the way but instantly accessible when I need. Wired directly across the output jack hot and ground. Works like a charm and in my opinion looks good.



Looks GREAT!

Would you mind sharing where you sourced that switch from? I'm having a tough time finding low profile arcade-style buttons like that!

Thank you for sharing.
drmarble is offline   Reply With Quote
Old 09-05-2012, 02:41 PM   #145
drmarble
Registered User
 
Join Date: Aug 2012
Bump to the bump

Who's got a source or a part number for the black pushbutton switch shown in the photo right above?
drmarble is offline   Reply With Quote
Old 09-09-2012, 10:06 PM   #146
Phoenix V
Registered MUser
 
Phoenix V's Avatar
 
Join Date: Mar 2011
Location: Brisbane, Australia
Quote:
Originally Posted by drmarble
Bump to the bump

Who's got a source or a part number for the black pushbutton switch shown in the photo right above?


Sent you a PM.

cheers
__________________
'It takes 100 guitar players to change a light bulb. One to change the light bulb and 99 to stand around pointing and say..."Yeah man, look...I can do that too"...'

My gear is in my Profile

Hondo 780 Deluxe Refurb

Gibson Studio Build
Phoenix V is offline   Reply With Quote
Old 10-02-2012, 12:28 AM   #147
drmarble
Registered User
 
Join Date: Aug 2012
Quote:
Originally Posted by Phoenix V
Sent you a PM.

cheers


Thank you!
drmarble is offline   Reply With Quote
Old 10-09-2012, 02:08 PM   #148
drmarble
Registered User
 
Join Date: Aug 2012
FYI, for everyone's edification and my own future reference, I found this same switch in the U.S., at Digikey:

http://www.digikey.com/scripts/DkSe...x=0&y=0&cur=USD

It's made by E-Switch, the manufacturer's part number is RP3502ABLK, and it looks like other companies carry it as well.
drmarble is offline   Reply With Quote
Old 11-14-2012, 02:59 AM   #149
fakuverymuch
Registered User
 
Join Date: Nov 2012
Dual-function "stutter" kill-switch for electric guitar
https://www.youtube.com/watch?v=WbE...&feature=g-hist

I would like to install one like this in a Strat. Does anyone here know how to wire it with a push pull Pot?
Would this be the way to do it? ;

https://lh3.googleusercontent.com/-.../s640/akill.jpg

Last edited by fakuverymuch : 11-14-2012 at 03:22 AM.
fakuverymuch is offline   Reply With Quote
Old 12-17-2012, 11:26 PM   #150
Rocketface2112
Face of rockery
 
Rocketface2112's Avatar
 
Join Date: Dec 2007
Location: Canada eh
i use that same switch in the pic above, i just go to store The Source to get it...

anyways... i added a killswitch to my guitar, the same low profile one shown earlier. but i seem to get some popping sound i even wired in a resistor as i heard that would fix it, but no luck.. on the lead chanel its fine you barley notice but on the clean its kinda annoying.


its wired between the 2 contacts on the output jack and the resistor is wired between the prongs on the switch.

is there anyways to completly remove the popping sound or is that just how it is suppose to be?
__________________
Very Orange CARVIN DC 700
PRS SE Custom - crunch lab&PAF pro
Ibanez GRX40 - modified
Peavey Valveking 112 w/Celestion G12

Quote:
Originally Posted by Shirate
The guitar, the only beautiful female that looks better with the top ON haha

Transformice

Last edited by Rocketface2112 : 12-17-2012 at 11:31 PM.
Rocketface2112 is offline   Reply With Quote
Old 02-02-2014, 03:43 AM   #151
Bowkore
The Spider Killer
 
Bowkore's Avatar
 
Join Date: Jul 2008
Location: Australia
Hey, I've managed to wire a button killswitch successfully. I've got a Dimarzio 3 way toggle I'm struggling with, its lay out is a bit different. I've got 3 pins on one side and 2 on the other, I know the centre pin is the ground but I want it to kill the sound on the top and middle position and only be on when its facing the ground. (so, on/off/off)

How do I wire this one up?

http://i61.tinypic.com/1zprtc4.jpg
__________________
My Gear:
Guitars:
Ibanez RG2570E + Button killswitch
ESP LTD F-10 + Toggle killswitch
Effects:
Boss BF-3 Flanger
Boss DD-7 Delay
Digitech Whammy IV
Vox V847 Wah
Amps:
Peavey Bandit 112

Quote:
Originally Posted by Zero-Hartman
I should call you kore from now on.
Bowkore is offline   Reply With Quote
Old 02-03-2014, 12:43 AM   #152
Invader Jim
Jim'll fix it.
 
Invader Jim's Avatar
 
Join Date: Aug 2005
Location: In the Chamber of Understanding
You mean this switch (the top one)?
http://www.stewmac.com/freeinfo/i-1...allswitches.jpg

The wiring is simple. Here's a pic.
http://i57.tinypic.com/11js09l.jpg
__________________
Wiring Thread
Quote:
Originally Posted by Telecaster7
I can't imagine a hand made Russian spec Big Muff would be that desirable. Maybe I'll just use both and crush people with my epic russian gain penis.
Invader Jim is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 09:28 AM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.