Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  

Old 03-28-2013, 06:23 AM   #1
Registered User
Join Date: Jul 2011
Screwed up rewiring EMG 81/85

Hi guys,
I wanted to try out something different so I decided to move my EMG 81/85 set from my ltd viper to my jackson rr5 just for fun.
I ran into many problems wiring.

The input jack was far away from the control cavity so I had to cut off wires and resolder longer bits of wire.
The solderless system has these black clips at the end that clips into the pickups. They were too big to fit through the small holes of the pickup cavity, so I cut it in the middle and I saw that the thick white wire has small metal wires and a small white wire in the middle. So there are two wires in one. I cut it, and now I cannot connect it properly, what do I do now?
LPshin is offline   Reply With Quote
Old 04-01-2013, 06:05 PM   #2
Registered User
Join Date: Dec 2012
get a new wiring kit
bichkindaguy is offline   Reply With Quote

Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 08:38 AM.

Forum Archives / About / TOS / Advertise with us / Customer Support / Ultimate-Guitar.Com © 2016
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.