BaDG0oD

Hello, i searched for wiring diagram for Electric guitar with Humbucker(Bridge) and P90(Neck), With 2 Volume and 2 Tone knobs.

So i found random diagrams, and i made my from Seymour Duncan Website( Thanks to Paint too. )

Could anybody help me? Will this work?

http://img14.imageshack.us/img14/9163/customzp.jpg

Thanks!

BaDG0oD

Made it from this : http://www.seymourduncan.com/suppor...tic=2h_2v_2t_3w

And this : http://www.seymourduncan.com/suppor...p?schematic=p90

Wiring Diagram

SISO

Yes, I think so.

adambauman31

yes it will work. the fact that it is a p90 doesnt make any difference as far as wiring.

BaDG0oD

But wiring is perfect? I mean, it will work 100%? Im planning adding Push/Pull for Humbucker coil split.

LeviMan_2001

Adding coil split is easy. Just have the switch wired so that in the split position the red and white wires get shorted to ground.

__________________
Danelectro Longhorn guitar build: http://www.ultimate-guitar.com/foru...d.php?t=1564392

BaDG0oD

What effect gives coil tap?
But if i want to sound humbucker like single-coiled pickup, i should do Coil Split?

LeviMan_2001

Are you asking what's the difference between a coil tap and a coil split? A coil tap technically is a tap in the coil where you can reduce the windings in the coil by flipping a switch. But 99.9% of the time when people say coil tap in reference to guitars, they mean the same as a coil split. And yes a coil split would split your humbucker to a single coil.

__________________
Danelectro Longhorn guitar build: http://www.ultimate-guitar.com/foru...d.php?t=1564392

BaDG0oD

Ye, i know. Coil split is the right one. A lot of people thinks what coil split and coil tap are the same. Actually, coil tapping is for Single-Coiled pickups( usually), and split is for humbucker.

As i know, i can split it with push/pull pot, and i can make it with pot and the DPDT switch(ON-ON) by just connecting wires like on push/pull pot diagram.

BaDG0oD

http://s9.postimage.org/atpxrgtn3/Custom_with_Split.jpg

I made new digram, added coil spliting by Dpdt switch (on-on). I hope this one works too!

LeviMan_2001

Thatll do it.

__________________
Danelectro Longhorn guitar build: http://www.ultimate-guitar.com/foru...d.php?t=1564392

BaDG0oD

Great! And Thanks guys for help!

BaDG0oD

I Also added master volume, http://postimage.org/image/boczk62jr/
and Will it work?

W4RP1G

Yup

__________________
Homemade pickup winder!