|
|
#21 |
|
Grumpy Old Tech
Join Date: Oct 2009
Location: Australia
|
If you can't fix it yourself, don't bother. If you do do it yourself try to get one with a higher voltage rating than the one that was in it. Same capacitance but higher voltage. You'll have to check for scorching elsewhere on the board before even bothering. Caps will blow all by themselves at times but you'll want to be checking that nothing shorted out downstream that caused it.
__________________
Gilchrist custom guitar Yamaha SBG500 Telecaster Ibanez Iceman Roland GP-8 Quadraverb Abbey Harmonic II Marshall JTM45 clone Marshall JCM900 4102 (modded) Marshall 18W clone Fender 5F1 Champ clone Marshall 1960A Cathbard Amplification |
|
|
|
![]() |
| Thread Tools | Rate This Thread | |
|
|