Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Electric Guitar
User Name  
Password
Search:

Reply
Old 11-12-2013, 09:52 AM   #1
MilesJeffery
Registered User
 
MilesJeffery's Avatar
 
Join Date: May 2013
Question C Standard Tuning on a 27" Baritone

I was wondering what strings anyone could recommend me for tuning to C standard on a 27" baritone.

I've been experimenting with a couple of other tunings and strings sets and have realized that C standard is plenty low enough for the styles that I play. The set I've been using for the past few weeks is a 13-56 nickel-wound set in A standard because the tension feels best like that (this was before I realized that C is low enough for me)

I was thinking about getting a 12-52 set (with a wound 3rd) but then I wasn't sure if that was too much because the .046 in my current set is pretty much perfect at D (a D g c e a) so I was thinking the next size up from that (.048/.049) would be good for two semitones lower (C) so now I'm not sure if a 10-49 set would be better suited.

I would rather go with the skinnier set because smaller strings feel better to me but, again, I'm not sure on the tension.

P.S. I'm living as a student right now so buying two or three sets and wasting some isn't really in my budget right now. That's why I'm wanting some advice here otherwise I would've just bought both.

Thanks,
Miles.
MilesJeffery is offline   Reply With Quote
Old 11-12-2013, 10:01 AM   #2
AJScott
Registered User
 
AJScott's Avatar
 
Join Date: Nov 2010
I personally wouldn't know which would be perfect for a 27", but I would of guessed a 9/10 to like a 45/50. Experiment?
AJScott is offline   Reply With Quote
Old 11-12-2013, 01:39 PM   #3
demonhellcat
Registered User
 
Join Date: Aug 2010
I have my 25.5" scale guitar tuned to D standard with 11-52's and it feels like the strings have less tension than my 24.75" scale guitar in E standard with 10-46's. With that as a reference I'd probably have to go to 12's to get down to C on my guitar.... compensate for the 27" scale and you're probably back at 11's.

I think your 10-49 is in the ball park. I'd probably buy 2-3 varieties and keep each set on for a two week period to figure out what you like and what fit's your playing style.
demonhellcat is offline   Reply With Quote
Old 11-12-2013, 02:37 PM   #4
Doogy-Style
Guitar Noob
 
Doogy-Style's Avatar
 
Join Date: Jul 2010
Location: Switzerland
My tokai which is a 24.75" is tuned in C standard with 13-56 if I recall correctly. And it feels just right.

So you might just wanna use one of these tension calculators to figure out what you would need for the same tension on a 27".
__________________
Yamaha SG 800
Tokai USG 118s
Hughes&Kettner Tube Meister
Jet City JCA12XS
Laney Cub 10
Electro Harmonix Big Muff pi (tone/wicker)
Boss CH-1 Super Chorus
Walden CG 570 White Horse
Doogy-Style is offline   Reply With Quote
Old 11-13-2013, 04:07 AM   #5
MilesJeffery
Registered User
 
MilesJeffery's Avatar
 
Join Date: May 2013
Thanks for the feedback. I'll go for the set of 11s because they are the cheapest at the moment. I prefer a slight bit of under tension so I'm not bothered if they are a tad loose.
MilesJeffery is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 11:39 AM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.