Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Guitar Gear & Accessories
User Name  
Password
Search:

Reply
Old 11-24-2012, 08:57 PM   #1
alans056
Registered User
 
Join Date: Dec 2010
Jack port loose on Riviera!!

Hey y'all

The jack port on my Epi Riviera (hollowbody) is loose... But unlike a Les Paul there is no access to repair it!

The f-holes are too small... how can I fix it ??

thanks!!!
alans056 is offline   Reply With Quote
Old 11-24-2012, 09:54 PM   #2
AcousticMirror
loves cheesecake
 
AcousticMirror's Avatar
 
Join Date: Dec 2009
The nuts in the outside right. You just need a locking spanner for the nut
__________________
buffalo buffalo buffalo buffalo buffalo buffalo buffalo.
AcousticMirror is offline   Reply With Quote
Old 11-24-2012, 10:39 PM   #3
Cathbard
Grumpy Old Tech
 
Cathbard's Avatar
 
Join Date: Oct 2009
Location: Australia
http://www.stewmac.com/shop/Tools/S...he_Gripper.html

You can make something similar yourself with an allen bolt a piece of surgical rubber tubing and a couple of nuts. The bolt has to fit in the hole, tubing that just fits snugly in the hole around the bolt. Then screw down the nut to distort the tubing, then use the second nut as a locking nut to hold it all in place and give you something to hold onto with a spanner/socket. You'll probably need a washer between the head of the bolt and the tubing depending on the bolt you use.

I've also done it using a pair of needle nose pliers pushed into the hole and pulled open to grab the jack while you tighten the nut on the jack. I had a pair that I ground the back of the jaws flat so there was a corner to bite into the inside of the jack. That worked too.
You could also modify a pair of outer circlip pliers the same way so you squeeze to hold the jack still rather than trying to pull the handles apart like you have to with pliers. Some circlip pliers already have corners on the jaws so no modification is even needed.
__________________
Gilchrist custom guitar
Yamaha SBG500
Telecaster
Randall RM100
Abbey Harmonic II
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Marshall 1960A
Boss GT-100


Cathbard Amplification

Last edited by Cathbard : 11-24-2012 at 10:49 PM.
Cathbard is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 12:50 AM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.