|11-25-2012, 04:22 PM||#1|
Imagine All The People
Join Date: Mar 2007
Vintage Amp Recap
I'm looking into picking up a 70's Traynor YBA-1 amp head. I'm not certain yet, but I've got a feeling that it may need a recap. I'll know for sure when I try it out.
Anyways the reason I'm posting this thread, is to determine if it is feasible for me to recap the amp myself, or if I should seek professional help.
I have some soldering experience, and I have done some electronics courses in college, so I have a basic understanding on how it works, just not a lot of firsthand experience.
If I have to bring it to a tech, does anybody have a ballpark figure of what it will cost me? The main reason why I don't want to bring it to a tech, is because I'm new to the province, and I don't really know what the quality of the work will be, or who I should trust with my gear. Maybe I'm just being a bit paranoid, but I knew my last tech very well, and I would trust him completely with my gear.
Gibson Les Paul 60's Tribute
MIJ Contemporary Strat
Snake Pit Les Paul
MIM Fender Tele
Jet City JCA 50H
Mesa Boogie 212
|11-30-2012, 01:15 AM||#2|
Join Date: Nov 2012
Looks like it would be no trouble with the tagboard layout.
Definitely worth doing yourself if you can solder alright.
If you want firsthand experience, here's your chance
Do a little reading on servicing tube amps. There are a few safety issues you should be aware of (i.e. high voltages).
You will find some caps are no longer common values anymore. Basically, if there is any doubt, get the cap with the higher voltage rating.
One thing you want to watch is the first supply cap after the rectifier (something like 80uF). Don't go and put a larger capacitance one in as the old tube rectifiers have a limit to their impulse current when switched on and you can damage them by forcing them to charge up bigger caps.
Last edited by sethasaurus : 11-30-2012 at 01:17 AM.
|11-30-2012, 01:23 AM||#3|
Doesn't speak guitar
Join Date: Dec 2009
Location: Traffic Town LA
^ great answer.
Keep in mind the electrolytic are polarized. Make notes before you remove them.
Otherwise it gets messy. And smelly.
|Thread Tools||Rate This Thread|