Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  

Old 01-22-2013, 11:09 AM   #1
Registered User
Join Date: Dec 2011
1st Project: Superstrat refurbish

Hello GB&C

I am in need of your advice as I am about to embark in my very first project ever.

I have a white white white ~80s Hondo Superstrat (HH,vol&tone,3-way,6-screws vintage tremolo, bolt-on) which I decided I want to pimp.

Why I want to do it:
1)It will be a fun and useful/educational experience
2)The guitar is of sentimental value but has considerable playability problems (tuning stability, intonation, crappy pups)
3)It probably is the loudest unplugged electric I've ever played. The thing resonates/sustains like a beast.

The plan is to rebuild it into a single splittable humbucker superstrat (with series/parallel switching if possible).

List of things I will probably buy (open to suggestions):
Graphtech nut
Tremolo (Wilkinson)
Grover Machineheads
Roller Tree (will I need one?)
Color (silver)
Neck plate
Τhe desired outcome:
A silver, with black accessories, superstrat, with a single humbucker.

1)Any specific/specialized tool I am going to sorely need? I ll probably do most of the sanding/stripping by hand.
2)In terms of finishing, will I need a clear-coat to apply after the color? The neck is unfinished and I like as lightly finished as possible necks (feel-wise) what do I use to do it?
3)Will I have to fill the neck-bucker hole?

The cost is under 300 euros at the moment. I ll probably get a Holydiver with a "silvery" cover for the pup.

Sorry for the wall of text
Deledhel is offline   Reply With Quote
Old 01-22-2013, 05:47 PM   #2
Registered User
Join Date: Dec 2011
Ermmm... Nobody??!? I am kinda sad now, was expecting to return from work and find at least some answers
Deledhel is offline   Reply With Quote
Old 01-22-2013, 06:15 PM   #3
UG's Industrial Designer
MG_Sora's Avatar
Join Date: Mar 2006
Location: Flying In A Blue Dream
1.- You might want to read a bit about stripping a guitar finish. It's not nearly as fun as it sounds, really, specially not sanding it. It is totally doable, but might want to get a palm sander, or something that keeps the sandpaper from bending, which can result in uneven scratches and wavy surfaces that stick out like a sore thumb with glossy finishes.

There are many options for stripping finishes, see what suits your skills the most.

2.- This is just personal preference, mostly. I like to get a clear coat after the paint to get a smoother surface, and to make the finish look good for longer. You might want to try in a scrap piece of wood first to see if you like it, though.

Some finishes actually REQUIRE you to get a clear coat, I'm not entirely sure how common it is on your country, but here DuPont, for example, sells a type of paint that is matte when applied, so you need to get a coat of something on top to seal it. We call it "Lacquer" (literal translation) but I doubt that the term means the same on English speaking countries.

Said paint is at least twice as expensive over here, so it's not like you'll walk in a store and get the wrong one by accident. In any case, I insist, try the paint you buy in a piece of whatever you have in hand and see how it looks.

What most people forget is that a clear coat doesn't necessarily means it has to be a thick, glossy coat. There are a bunch of finishes available out there, glossy, satin, matte, just to name a few.

As for the neck, there are really something best. Some folks prefer a satin finish because it feels faster than a glossy one, but there are a lot of ways to finish a neck, just do a little research and you'll see what I mean.

3.- You don't HAVE to, but you might want to. It won't affect dick.
Are You a PROG-HEAD? I'm NOT.

Last edited by MG_Sora : 01-22-2013 at 06:22 PM.
MG_Sora is offline   Reply With Quote
Old 01-22-2013, 06:23 PM   #4
Registered User
Explorerbuilder's Avatar
Join Date: Aug 2010
Location: Corrales, NM
Tip #1,
DO NOT STRIP THE FINISH ALL THE WAY DOWN TO WOOD. Since you are repainting, you can just scuff sand to 400 grit, then apply primer over that.
Facebook page: https://www.facebook.com/pages/LEF-...142725369133117
Explorerbuilder is offline   Reply With Quote
Old 01-22-2013, 06:24 PM   #5
Doesn't speak guitar
Join Date: Dec 2009
Location: Traffic Town LA
Originally Posted by Explorerbuilder
Tip #1,
DO NOT STRIP THE FINISH ALL THE WAY DOWN TO WOOD. Since you are repainting, you can just scuff sand to 400 grit, then apply primer over that.


Also tape the neck pocket off and do not add any paint there. Otherwise the neck won't fit proper.
Originally Posted by DeathByDestroyr
See, it's important that people clarify when they say "metal", because I pretty much always assume they are a Cannibal Corpse fanboi.
R45VT is offline   Reply With Quote
Old 01-22-2013, 08:54 PM   #6
Registered User
ibanez2011's Avatar
Join Date: Jan 2011
Location: michigan
If you do want to strip it down to the wood (which I wouldn't recommend) I would get a heat gun. It makes stripping the paint off a lot easier and faster
“More metal than your gran’s left hip.” - Paul Allender on his PRS signature guitar
ibanez2011 is offline   Reply With Quote
Old 01-22-2013, 11:20 PM   #7
Registered User
Join Date: Dec 2011
Stripping might tell me the wood type, but other than is there any other reason that somebody would want to do it to apply a solid color afterwards?

On the subject of neck finish:
The site that I linked has this (danish oil). Is this the equivalent of Tru Oil?

Will probably go with cellulose laquer, mat gloss to finish the body, but for curiosity's sake, how does a solid colored body look finished with oil?

I don't think this guitar is shielded (at least the tremolo-cavity certainly isn't ). Should I shield it?

Again thanks a lot for your time and your answers.
Deledhel is offline   Reply With Quote
Old 01-22-2013, 11:33 PM   #8
I hate sanding
Join Date: Sep 2007
Location: pukekawa. new zealand
chances are the body is plywood so a new neck should be behind "new body"
sytharnia1560 is offline   Reply With Quote
Old 01-29-2013, 01:39 AM   #9
Registered User
RebuildIt's Avatar
Join Date: Apr 2011
Location: Hope, BC Canada
I think you will find that a new neck changes the guitar a lot. Probably more than you like. If you like a clean feeling neck, sand it down to the wood and do Nothing. I have one that I did
like that and it is the fastest thing I have ever played. (Univox strat in my pictures)
RebuildIt is offline   Reply With Quote
Old 01-29-2013, 09:10 PM   #10
Registered User
Join Date: Oct 2010
Location: Manassas, Virginia
So if you are trying to repaint a guitar with a set neck a solid color. Then you should then just sand it down to the primer, and then repaint it with the fretboard taped.

Does this sound correct?
LTD EC-1000 vb
Ibanez RG7321

Line 6 POD HD500

Audio-Technica ATH-M50
NortonDevon is offline   Reply With Quote

Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 08:20 AM.

Forum Archives / About / TOS / Advertise with us / Customer Support / Ultimate-Guitar.Com © 2015
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.