Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  
Password
Search:

Reply
Old 05-04-2013, 03:33 AM   #1
dragozan
Registered User
 
dragozan's Avatar
 
Join Date: Sep 2009
Location: Sheffield, England
white transfers?

when I do guitar refinishing, I like to put my trademark somewhere on the guitar. I usually do this by masking off the area, printing out the logo, and transferring it to the masking tape through graphite, before cutting it out and spraying over it with an airbrush. However, a lot of the time, this can turn up some rather messy results, and the process is quite fiddly on its own.

I've heard that some guitar companies use a transfer of sorts when putting their logos on the headstocks of guitars. Can you actually buy this sort of transfer paper/sticker?

I've heard t-shirt transfer paper is pretty useful and can be used through a home printer, to print your design straight onto it. However, my logo sometimes has to be done in white (over a black guitar for example). Since typical printers only print in cyan, magenta, yellow and black, this is obviously not possible with a home printer. Is there any suggestions people can give me on any of these points?

Thanks
dragozan is offline   Reply With Quote
Old 05-04-2013, 03:56 AM   #2
dragozan
Registered User
 
dragozan's Avatar
 
Join Date: Sep 2009
Location: Sheffield, England
EDIT: after doing a quick bit of research, I came across waterslide paper, which seems to be the most recommended stuff for transfers and decals. People also way that, without a specialist printer, getting a white waterslide will require using white waterslide paper cut precisely and then transferred. This is the best I have so far. Any other suggestions are still welcome
dragozan is offline   Reply With Quote
Old 05-04-2013, 04:03 AM   #3
von Layzonfon
UG's Grammar Stickler
 
von Layzonfon's Avatar
 
Join Date: Dec 2010
Location: 22 Acacia Avenue
You can get waterslide transfer paper for inkjet and laserjet printers but, as you have noted, printers generally can't print in white.
This page has some thoughts on how you might get around this.
I guess some things may be more suitable than others, depending upon how intricate your logo is.

EDIT: You ninja'd me, dammit.
__________________

Paddy von Layzonfon! Founder of The Spell it RELICKED Club
von Layzonfon is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 07:24 PM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.