andyhatescrass

Would I be able to run a splawn quickrod into a marshall 4x12 and use an external ss amp for reverb? I want to try this is because I don't have a reverb pedal and my fender frontman 65r has that effect, so basically I want it to act as a reverb pedal AND SOUND DECENT. I usually don't use reverb, which is why I haven't invested in one, so this is my attempt at saving money, it would just be for recording purposes. I've heard of aby pedals, but i'm not sure if that would be the most ideal thing since I dont really want to combine the sounds of the amps. I'd like to have the sound coming from just the 4x12, although if that is the only way, I will probably end up doing it.

Could the fx loop in the 65r work like a pedal possibly? I've never experimented much with combining amps, I just want to make sure this would be ok and wouldn't harm either amp.

Eppicurt

Nope.

__________________

Cathbard

Watch the auctions for a few days and you should be able to pick one of these up for $50 or even less. You can get them for $100 all day long.

http://www.ebay.com/sch/Musical-Ins...alesis+nanoverb

__________________
Gilchrist custom guitar
Yamaha SBG500
Telecaster
Ibanez Iceman
Roland GP-8
Quadraverb
Abbey Harmonic II
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
Marshall 1960A

Cathbard Amplification