Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  
Password
Search:

Reply
Old 09-30-2012, 04:08 AM   #1
Tmusician
Registered User
 
Tmusician's Avatar
 
Join Date: Sep 2009
Applying Pickup Covers (Wax Needed?)

I got Seymour Duncan pickups, installed them, and then got some pickup covers. Do I need to wax pot the pickups? Can I maybe just put a bit of candle wax on it or something?
Tmusician is offline   Reply With Quote
Old 09-30-2012, 04:15 AM   #2
Kevin Saale
Talks to empty chairs
 
Kevin Saale's Avatar
 
Join Date: Dec 2007
Location: In a desert, next to a chair
If I'm remembering right they need to be potted. I'm pretty sure you can google it to learn how to do it. From what I read its not terribly hard.
__________________
I don't give a shit if you listen to me or not.

Quote:
Get three coffins ready.

My mistake, four coffins.
Kevin Saale is offline   Reply With Quote
Old 09-30-2012, 11:27 AM   #3
Robbgnarly
Registered User
 
Robbgnarly's Avatar
 
Join Date: Feb 2011
Location: NSB, FL
the pickups should have been wax potted already. Move the ribbon a little and see if there is wax in there (most pickups are wax potted, very few are not).
__________________
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
Robbgnarly is online now   Reply With Quote
Old 09-30-2012, 02:03 PM   #4
inkandlead
Registered User
 
Join Date: Jan 2009
The only Seymour Duncan pickups I know of that aren't potted are the Seth Lover model. And even those may be potted at this point. Get the cover on as tight as you can. Solder it well to the mounting plate and see how it sounds. When a pickup comes from the factory with a cover it is potted as an entire piece. Potting is not hard as long as you have the ability to do it but it shouldn't be necessary to re pot.
inkandlead is offline   Reply With Quote
Old 09-30-2012, 02:24 PM   #5
\m/slipknot\m/
Registered User
 
\m/slipknot\m/'s Avatar
 
Join Date: Nov 2005
Location: new jersey
The Pups should be potted but you want to get some wax on the inside of the covers to minimize the risk of any unwanted feedback. Its not difficult at all, check out this tutorial from mojotone:

__________________
I apologize for my username, I was 15

Robbinscustomguitars.com

Robbins Custom Guitars FB Page
\m/slipknot\m/ is offline   Reply With Quote
Old 11-12-2012, 01:30 PM   #6
Ibanez016
Registered User
 
Ibanez016's Avatar
 
Join Date: Jul 2012
kinda bumping here but do i put masking tape all over the front of my pickup because my pickups are flat blade humbuckers?
Ibanez016 is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 10:54 PM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.