Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Guitar Gear & Accessories
User Name  
Password
Search:

Reply
Old 02-02-2013, 11:52 AM   #1
Kayde
Registered User
 
Join Date: Feb 2013
Help With gear!

Hi my names kayde and i am the lead guitarist/songwriter in the band FallenAngel [forbidden link]

My current rig that i use for gigs is as followed

Marshall mosfet lead 100 head (solid state) This is connected through stereo with marshall 1960a 300 watt cab

Boss gt-10 (this is used to add compression and reverb, delays etc. (i am using the boss with the FOUR CABLE METHOD.)

Now that fallen angel have a dded a bass player to the lineup i had to turn up my volume at the gig, the amp was on full but the boss output on a quater. ~The problem was when i turned up the output on the boss the sound became very muddy and crunchy.

I already had the boss before buying the head, i use the compression on the boss to drive the amp as my style is maily metal where as the amp is suited to rock, this gave me a nice sound of say a beefed up randy rhoads tone which is what i was aiming for however this is strictly on low to medium volumes.

I would like information on wheather it would be best to use other pedals if so which ones or ways i can tweak the gt-1o

Thanks Kayde Hill
Kayde is offline   Reply With Quote
Old 02-02-2013, 12:16 PM   #2
Robbgnarly
Registered User
 
Robbgnarly's Avatar
 
Join Date: Feb 2011
Location: NSB, FL
what happens if you turn the amp down and turn the GT-10 up? Are you still getting a muddy sound?
__________________
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
Robbgnarly is offline   Reply With Quote
Old 02-02-2013, 12:22 PM   #3
monwobobbo
Registered User
 
monwobobbo's Avatar
 
Join Date: Jul 2009
Location: scottsville ny
do you do the no mids thing? if so then you're killing your sound. how loud is the bass player? perhaps getting a tube amp would help (you knew someone would say this).
monwobobbo is offline   Reply With Quote
Old 02-02-2013, 12:24 PM   #4
Robbgnarly
Registered User
 
Robbgnarly's Avatar
 
Join Date: Feb 2011
Location: NSB, FL
Well TS is cranking the master vol on the amp and going low on the GT-10. So my guess is he is clipping the amp and we all know how that sounds with SS.
__________________
2002 PRS CE22
2013 G&L ASAT Deluxe
2009 Epiphone G-400 (SH-4)
Marshall JCM2000 DSL100
Krank 1980 Jr 20watt
Krank Rev 4x12 (eminence V12)
GFS Greenie/Digitech Bad Monkey
Morley Bad Horsie 2
MXR Smart Gate
Robbgnarly is offline   Reply With Quote
Old 02-02-2013, 12:28 PM   #5
Kayde
Registered User
 
Join Date: Feb 2013
I have tried lowering volume on amp and turning gt10 up and its the same, i have turned down the mids and it dosent really make a diffrence, the bass isnt stupidly loud, we play live with backing tracks prevosly we were using vst bass sounds so the mix wasnt as thick hence the guitar bieng heard clearer now that we have a live bass the volume has to increase.
Kayde is offline   Reply With Quote
Old 02-02-2013, 12:32 PM   #6
monwobobbo
Registered User
 
monwobobbo's Avatar
 
Join Date: Jul 2009
Location: scottsville ny
ok. are you using the G10 for your distortion or the amp?
monwobobbo is offline   Reply With Quote
Old 02-02-2013, 12:35 PM   #7
Kayde
Registered User
 
Join Date: Feb 2013
the amps distortion but that only reaches acdc type gain so i add compression from gt10 which seems to add . If you check this, get past the intro and you will here the tone i have at low volume. [forbidden link] its with no eq or proccesing just compression from gt 10
Kayde is offline   Reply With Quote
Old 02-02-2013, 12:36 PM   #8
Kayde
Registered User
 
Join Date: Feb 2013
ok link wont work type in fallen angel horror man on youtube.
Kayde is offline   Reply With Quote
Old 02-02-2013, 01:05 PM   #9
monwobobbo
Registered User
 
monwobobbo's Avatar
 
Join Date: Jul 2009
Location: scottsville ny
ok first let me say i liked the song. was expecting cookie monster death metal. your amp is solid state which when pushed to hard will sound like crap. i'd suggest running the amp clean and using your G10 for distortion. you can progam in seperate sounds for lead and rhythm and get more out of your G10. in the end a better amp is what you really need.
monwobobbo is offline   Reply With Quote
Old 02-02-2013, 01:07 PM   #10
Kayde
Registered User
 
Join Date: Feb 2013
ok thank you and thanks, that is how i used to use i just felt the sounds were to thin but i see your point thanks allot.
Kayde is offline   Reply With Quote
Old 02-02-2013, 01:23 PM   #11
monwobobbo
Registered User
 
monwobobbo's Avatar
 
Join Date: Jul 2009
Location: scottsville ny
you might want to run a distortion pedal in front of the amp then. personally i like the EH Metal Muff. also keep in mind that the bass needs a spot in the mix and you don't need super thick guitar tone with it there. (see Valley Of Gwangi in my profile)
monwobobbo is offline   Reply With Quote
Old 02-02-2013, 01:42 PM   #12
Kayde
Registered User
 
Join Date: Feb 2013
also im using the head through stereo matching the 4ohms with 4 and 16 with 16 would you recomend this or mono, cheers and ill check now.
Kayde is offline   Reply With Quote
Old 02-02-2013, 01:45 PM   #13
monwobobbo
Registered User
 
monwobobbo's Avatar
 
Join Date: Jul 2009
Location: scottsville ny
never ran in stereo so not sure about that. try it both ways and see what happens soundwise.

you should upload some of your tunes to your profile makes it easy for people to check them out here.

Last edited by monwobobbo : 02-02-2013 at 01:47 PM.
monwobobbo is offline   Reply With Quote
Old 02-02-2013, 01:48 PM   #14
Kayde
Registered User
 
Join Date: Feb 2013
yer i will now cheers man and loving yours!
Kayde is offline   Reply With Quote
Old 02-02-2013, 02:47 PM   #15
Kayde
Registered User
 
Join Date: Feb 2013
Music Is Now Up On My Profile!!
Kayde is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 05:47 PM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.