Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  
Password
Search:

Reply
Old 02-04-2013, 08:14 PM   #1
Zeppelinism96
Registered User
 
Join Date: Oct 2012
Guitar Output Hum, need help.

My barrel jack went to crap on my kramer and without the extra money to replace it i threw in a standard jack, with some modding it works nicely, but with one problem, there is an output hum that goes with everything the humbucker sends out, its unbearable, i dont even want to play that guitar anymore. I have done the exact same thing a time before but with no hum. A noise gate doesnt catch it either. The hum sounds almost like a cable that has been disconnected from the guitar but louder, is the cable being open instead of inside the barrel causing this? Oh and when i touch the cable it gets insanely loud, even before i touch it. Help me fix this please. thanks
If you need pictures just ask.
Zeppelinism96 is offline   Reply With Quote
Old 02-04-2013, 08:45 PM   #2
LeviMan_2001
Registered User
 
Join Date: Mar 2008
Did you wire the jack backwards?
__________________
Danelectro Longhorn guitar build: http://www.ultimate-guitar.com/foru...d.php?t=1564392
LeviMan_2001 is offline   Reply With Quote
Old 02-04-2013, 09:39 PM   #3
stonyman65
Unregistered User
 
stonyman65's Avatar
 
Join Date: Sep 2005
Location: Jacksonville FL.
Sounds like you might have wired the jack wrong, or the jack is shorting out on something.

Also, make sure everything is shielded properly.
__________________
Quote:
Originally Posted by strat0blaster
This is terrible advice. Even worse than the useless dry, sarcastic comment I made.

Quote:
Originally Posted by Cathbard
I'm too old for the Jim Morrison look now. When I was gigging I had a fine arse.
stonyman65 is offline   Reply With Quote
Old 02-04-2013, 11:01 PM   #4
Zeppelinism96
Registered User
 
Join Date: Oct 2012
Haha i might have, i will take a look, i slapped it together in 5 minutes so it is a possiblity! Thanks mate!
Zeppelinism96 is offline   Reply With Quote
Old 02-05-2013, 04:51 PM   #5
fastlanestoner
the nxt NEXT Nigel Tufnel
 
fastlanestoner's Avatar
 
Join Date: Sep 2007
Location: it's a dark night on the west coast...
classic sound of the T/S wired in reverse. the sound you're hearing is the lack of grounding
__________________
Audio Ecstasy Productions!

Guitar/Backline Tech in the Los Angeles area and on tour!
Custom guitar pedals and cabling for stage and studio!

I set up DAWs and tweak computers to record audio. Hit me up @ audioecstasyproductions[at}gmail.com
fastlanestoner is offline   Reply With Quote
Old 02-06-2013, 01:47 AM   #6
DESTROYER5000
Banned
 
DESTROYER5000's Avatar
 
Join Date: Dec 2012
Pretty much all of the above, reverse the wires on the jack and shield it with foil tape.
DESTROYER5000 is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 07:57 PM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.