Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Electric Guitar
User Name  
Password
Search:

Reply
Old 01-02-2013, 04:40 PM   #1
VoXBOss2011
Registered User
 
VoXBOss2011's Avatar
 
Join Date: Dec 2011
Question Pickup problems

Hey guys,

So, at Christmas, I received a very nice 2006 Dean Dimebag Razorback V which has had one owner (as far as I know), and has been played very little, it has absolutely no wear on the fretboard and the factory strings were still on it (I replaced them recently). It has a Seymour Duncan Dimebucker in the bridge and a DiMarzio in the neck (I think).

Basically, my problem is that when the pickup selector in in the middle position, everything works fine, but occasionally when I switch to the bridge pickup, about 90% of the volume disappears, there are no effects either, so it just sounds like a very weak clean channel. It usually works if I flick the switch back and forth about 6 times.

This has started happening with the Neck pickup as well, although not nearly as often.

Has this happened to any other Dean owner? Or any other guitarist for that matter? Would anybody have and advice or tips on how to fix this?

It would be much appreciated,

Eyes
VoXBOss2011 is offline   Reply With Quote
Old 01-02-2013, 04:51 PM   #2
mfh123456
Skeleton Warrior
 
mfh123456's Avatar
 
Join Date: Dec 2012
Location: Denmark
Sounds very much like a defective selector switch. The soldering and wires and other stuff are probably fine since it works in the middle position. It should be fairly easy to change it (either by you if you feel up to it or a guitar tech/store).

I doubt the selector itself can be repaired, but you never know. You could try to remove the back plate and see if it looks like its coming apart.

Cool guitar btw
mfh123456 is offline   Reply With Quote
Old 01-02-2013, 05:13 PM   #3
AJScott
Registered User
 
AJScott's Avatar
 
Join Date: Nov 2010
I had this exact problem with an Epiphone Les Paul of mine, it's quite fustrating. They replaced the switch and it worked fine, cost me 15.
AJScott is offline   Reply With Quote
Old 01-02-2013, 05:38 PM   #4
MaggaraMarine
Slapping the bass.
 
MaggaraMarine's Avatar
 
Join Date: Oct 2009
Location: Finland
I had that kind of problem with my Epiphone LP Standard. There were these two metal pieces in the selector that you had to bend (it was some kind of a contact problem). I can't explain it without pictures but after that it worked well. (I also have sold that guitar.)
__________________
Quote:
Originally Posted by AlanHB
Just rememeber that there are no boring scales, just boring players.

Gear

Charvel So Cal
Ibanez Blazer
Digitech RP355
MXR Micro Chorus
Laney VC30
Tokai TB48
Hartke HyDrive 210c
MaggaraMarine is offline   Reply With Quote
Old 01-18-2013, 09:24 PM   #5
VoXBOss2011
Registered User
 
VoXBOss2011's Avatar
 
Join Date: Dec 2011
I took the back off and everything looked okay, so I'm assuming it is the selector, thanks for the feedback by the way, it's much appreciated

Caolan
VoXBOss2011 is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 12:58 AM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.