Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Electric Guitar
User Name  
Password
Search:

Reply
Old 09-03-2015, 04:36 PM   #2541
anderson01
Portable generator review
 
Join Date: Sep 2015
I bought a generator . I have some help about user guide . I need practically information that's why I am posting here . my model is western house 7500 .if you have any one here please help me . I don't wanna disturbing you but acyually I need help to use it .e help me . I don't wanna disturbing you but acyually I need help to use it .
__________________
Click here to know more
anderson01 is offline   Reply With Quote
Old 12-01-2015, 02:16 PM   #2542
omertaxtasy
Registered User
 
Join Date: May 2012
Hey, I have an Ibanez RG1570Z, which the Edge Zero trem. It's been around two years with this guitar, and up until recently, it played like a dream. I prefer Standard-low action, .09-.42 string guage. Whenever I had to restring, I gave it to someone from a music store nearby (the only one in town) to do so. And if ever the action seemed to get bad and way too high, he fixed it for me by tightening the action studs at the bridge. Little did I know he was doing it wrong.

After playing for a couple of days, the action went way too low with a lot of string buzz and choking. SO I went over to the store once again and he told me it would have something to do with the truss rod. So he adjusted my neck, but the action got way too high and uncomfortable for me. So he worked with the action studs again and set it up for me.

When I came home and read about it, it turns out you have to use a smaller allen wrench and first loosen the stud locks inside the bolts prior to setting up your action. Well I guess the guitar tech from the store didn't do that and now when I tried it myself I can't do it. It's like the stud locks are stuck. The guitar is playing alright but it gets out of tune really fast now. And the action could still be lowered down (which would my more comfortable to me) but now I just don't know what to do. It turns out the guy doesn't know jack***t about edge trems.

Also, the tremolo's way too tight and rigid now, it's like I can't even use it.

What should I do in order to get the inner stud locks back to how they should be and to loosen the trem so that it can be used? And also, there's still some chokes that I'm experiencing on the 17th/18th frets, whenever I bend. Help me out anyone?
omertaxtasy is offline   Reply With Quote
Old 12-24-2015, 07:08 PM   #2543
Gaalandrew
Registered User
 
Join Date: Dec 2015
Hey! I've just purchased a new guitar with FR special. I've never had guitar with FR before. I want to install a 11 string gauge with standard tuning, but my bridge is just never parallel no matter how I set the springs. It works with lower tunings, but I want standard. What should i do to solve this problem?
Gaalandrew is offline   Reply With Quote
Old 12-25-2015, 11:19 AM   #2544
jammonster
Registered User
 
Join Date: Dec 2015
I have a floyd rose trem. It's almost perfect. The 22 fret dies out when I bend up. It's subtle, but's it's there. The previous owner put 10's gauge (my personal fav's) I heard that floyds operate better using 9's could this help? Any advice woud be greatly appreciated.
jammonster is offline   Reply With Quote
Old 12-25-2015, 11:20 AM   #2545
jammonster
Registered User
 
Join Date: Dec 2015
OPPS! forgot to mention it's the high E string thanks.
jammonster is offline   Reply With Quote
Old 12-25-2015, 11:31 AM   #2546
DanyFS
Registered User
 
Join Date: Dec 2014
Quote:
Originally Posted by jammonster
I have a floyd rose trem. It's almost perfect. The 22 fret dies out when I bend up. It's subtle, but's it's there. The previous owner put 10's gauge (my personal fav's) I heard that floyds operate better using 9's could this help? Any advice woud be greatly appreciated.


Either the action is too low or the truss rod is not properly adjusted. Or a combination of both.

Also check if the Floyd is parallel with the body.

Floyds operate good with any string gauge, you just have to do a proper setup.
DanyFS is offline   Reply With Quote
Old 03-19-2016, 12:49 PM   #2547
BigYankBAll
Registered User
 
BigYankBAll's Avatar
 
Join Date: Mar 2015
I have a problem with action on the 1st fret. The action on it is too low, guitar is equipped with Floyd rose, the truss rod and bridge adjustments doesn't help. Any suggestions?
When I play an open 6th string it buzzes strongly. Is it possible to raise an action on 1st fret?

Last edited by BigYankBAll : 03-19-2016 at 12:52 PM.
BigYankBAll is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 01:10 PM.

Forum Archives / About / TOS / Advertise with us / Customer Support / Ultimate-Guitar.Com © 2016
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.