|12-04-2012, 02:42 AM||#1|
Join Date: Nov 2012
Bogner Alchemist + 1960B 4x12
I recently decided to go with this combination, but I'm a little confused regarding Ohms/Wattage. Super beginner question, I know. Anyway here are the specs on the cab:
Speakers: 4 Celestion G12T-75
Power: 300 watts
Stereo Impedance: 8 ohm
Mono Impedance: 16/4 ohm
On the back of the Bogner, there are three outs:
B (2 outs): Connect 8 Ohm pair OR 4 Ohm single
A (1 out): 8 Ohm out (16 Ohm OK)
I understand the very basics of impedance, resistance, and wattage, but the way this should be connected is a little confusing to me -- should I connect the head's two B outs to the cab's L/R inputs set at stereo?
Lastly, will the head being 40W and the cab being 300W pose any problems? I've read that using an amp with a lower wattage than the cabinet is fine, but I just want to be sure.
Thanks for your help!
Last edited by charles? : 12-04-2012 at 03:12 AM.
|12-04-2012, 02:47 AM||#2|
Join Date: Jul 2011
Connect the Mono impedance (4ohm) of your cab to the B 4ohm out of your amp. No problems at all with wattage.
Mesa Royal Atlantic
Emperor 4x12 Silver Bells
Gibson SG Standard
Catalinbread Ottava Magus
Jim Dunlop CFH
MXR Carbon Copy
Fuzz Hugger Algal Bloom
Way Huge Fat Sandwich
|Thread Tools||Rate This Thread|