Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  
Password
Search:

Reply
Old 10-09-2012, 12:38 AM   #1
Darkanus
Registered User
 
Join Date: Apr 2011
Electronics cavity cover socket, how do I route it?

I'm talking about the small slot around the cavity itself where the plastic cover goes into.
I don't have a router, dremel or a chisel. Does this even possible without any of these? Maybe with a blade, sanding paper and patience?
If not, since it's really cheap, can a chisel help me with this?

Help please
Darkanus is offline   Reply With Quote
Old 10-09-2012, 02:50 AM   #2
Punisher23j
Registered User
 
Punisher23j's Avatar
 
Join Date: May 2010
I highly recommend having a router, there's no other method that would work with good results. A dremel would be my second option but it would be very tedious and require a steady hand to yield good results.
Punisher23j is offline   Reply With Quote
Old 10-09-2012, 04:04 AM   #3
whoomit
 
whoomit's Avatar
 
Join Date: Jul 2006
This is the best way I can think of, albeit slightly complicated.

Screw your cover down where you want it, and use a sharp scalpel blade to mark the outline onto the guitar. You can then put some fairly well-fitting MDF into the cavity, make sure it can't move around. Acquire the correctly sized hole saws or forstner bits for the rounded corners, and using a bit of geometry mark the centre of the circles onto the MDF. Drill pilot holes and then use the hole saw or forstner bit in each corner to the required depth.

You can then chisel the areas between each corner with a sharp chisel. You might want to widen and deepen the scalpel cuts a bit first. Be careful not to slip out of the groove though.

A lot of work there.
__________________
whoomit is offline   Reply With Quote
Old 10-11-2012, 05:17 AM   #4
Darkanus
Registered User
 
Join Date: Apr 2011
Unfortunately, I can't afford a router or a dremel for this project. Maybe in the future..

This method will work I guess but it sounds pretty difficult, especially since I don't have much experience with this. I think that I'll just place the cover on top of the wood so it'll stick out and save myself from this..
Thank you guys!
Darkanus is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 06:07 AM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.