10-15-2012, 09:45 PM
|
#1 |
|
Registered User
Join Date: Mar 2012
|
wiring a humbucker and single coil?????????
Hi Guys
Ive got a gfs lil killer humbucker 15k, and a gfs NEO7 neodymium single coil. i want to wire these to 1 volume pot, 1 tone pot and a 3 way toggle switch, has anyone got any wiring diagrams? Thanks Joe |
|
|
|
10-15-2012, 09:47 PM
|
#2 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
http://www.seymourduncan.com/suppor...tele_1hum_1sing
The wire colors aren't necessarily correct, but that diagram will do what you want.
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 10:10 PM
|
#3 |
|
Registered User
Join Date: Mar 2012
|
where would the ground wire lead too?
|
|
|
|
|
10-15-2012, 10:24 PM
|
#4 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
Which one? And what kind of guitar is it?
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 10:25 PM
|
#5 |
|
Registered User
Join Date: Mar 2012
|
its a strat shape with a humbucker as the bridge and a single coil as the neck
|
|
|
|
|
10-15-2012, 10:27 PM
|
#6 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
Ok, but which ground wire are you talking about? All the ground wires should go to the back of the volume pot.
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 10:28 PM
|
#7 |
|
Registered User
Join Date: Mar 2012
|
the one on the diagram that says ground wire from bridge
|
|
|
|
|
10-15-2012, 10:30 PM
|
#8 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
Thats the ground wire from the bridge. Its what grounds the bridge and strings. Assuming your guitar has a trem of some type the ground wire from the bridge will be soldered to the trem claw.
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 10:34 PM
|
#9 |
|
Registered User
Join Date: Mar 2012
|
is this the part that the springs attatch to on the trem, also how would i wire it to the toggle switch because the diagram only shows you how to wire it to a selector switch not a toggle
|
|
|
|
|
10-15-2012, 10:37 PM
|
#10 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
What kind of 3 way toggle? LP style?
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 10:37 PM
|
#11 |
|
Registered User
Join Date: Mar 2012
|
yep
|
|
|
|
|
10-15-2012, 10:44 PM
|
#12 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
http://www.seymourduncan.com/suppor...matic=3ws_trans
Bam, just sub in the lespaul switch for that diagram I showed you.
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 10:45 PM
|
#13 |
|
Registered User
Join Date: Mar 2012
|
cheers dude, you've been a great help
 |
|
|
|
|
10-15-2012, 10:47 PM
|
#14 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 11:05 PM
|
#15 |
|
Registered User
Join Date: Mar 2012
|
one more question, does it matter if i use 500k or 250k pots?
|
|
|
|
|
10-15-2012, 11:08 PM
|
#16 | |
|
Talks to empty chairs
Join Date: Dec 2007
Location: In a desert, next to a chair
|
I'd use 500k. 250k will probably be too dark for the humbucker. If you use 500k the single coil might be too bright, but you can just dial the tone back on it.
Your preference though, if you do 500k and don't like it, its not hard to change. Pots are cheap.
__________________
I don't give a shit if you listen to me or not. Quote:
|
|
|
|
|
|
10-15-2012, 11:16 PM
|
#17 |
|
Registered User
Join Date: Mar 2012
|
Thanks once again
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Rate This Thread | |
|
|
All times are GMT -4. The time now is 05:14 AM.