Iplayaguitar15

I have a lower end jackson i dont know the exact model. I made an ID thred on here and nobody knew but right now it has a vintage type trem of that helps. i want to get this http://www.musiciansfriend.com/acce...363039000001000 Would it work? and how do i install it? do i still need springs?



Pics in lower post

jeleopard

No, it will not work.

__________________
Legion!
Original 1969 Fender Jazzmaster
Jackson JS32R Dinky with EMG-ALX "Curry"
Ibanez RGD7421 "Stella"
Ibanez S470 "Haley"
MiM Fender Jazz Bass "Pancho"
Schecter Stiletto Elite "Kimmy"
Peavey 6505+ 112
Line 6 POD HD500

C0FF1NF33D3R

It's impossible to say without a photo, model #, or a link for your guitar. Obviously.

Iplayaguitar15

alright ill try to post a pic

Iplayaguitar15

http://farm8.staticflickr.com/7280/...8f683044b_c.jpg
http://farm8.staticflickr.com/7114/...78c9e153d_c.jpg

Sorry for the ipod pics its all i got

jinsu2301

if both bridge plates have those big 3 screws at the exact same position, then it might work. just replace the plate with the saddles with the new bridge. yes, you still need springs if you haven't locked your tremolo yet.

Iplayaguitar15

how do i know if their at the same position? and would it be an improvement? Also is the new one going to need screw near the bridge pickup like my trem now has?

Culler Amps

What are you smoking? He wants to put a HARDTAIL bridge on a trem equipped guitar. There isn't even a place to attach springs on the hipshot.......



T.S. - You pretty much have 2 options here.

A. Buy a better quality trem, that will bolt in place of the original.

B. Block the trem

There is actually one way to turn that guitar into a true hardtail, although it will require some serious modification, and I doubt you want to go that far -

Insanity ninja

I really wouldn't attempt to do that, unless the bridge is terrible, I'd just stick with it.

And in relation to that video, I watched the rest... he didn't shield his cavities!

__________________

Gibson LP studio, Fender Fatstrat, Tokai Firebird

Iplayaguitar15

So i could do that then install the new bridge?

Iplayaguitar15

Alright im going to simplify this. Can i install that hipshot bridge on my guitar without mods?

Insanity ninja

I'll simplify the answer.

No.

__________________

Gibson LP studio, Fender Fatstrat, Tokai Firebird

Iplayaguitar15

Okay thanks. Can you recommend a bridge that will that comes in black?

Insanity ninja

It'd be much easier to find out if you could tell us the model.
And is there anything wrong with the bridge, or do you just wanna change the colour?

__________________

Gibson LP studio, Fender Fatstrat, Tokai Firebird

Iplayaguitar15

I have no clue and nobody had any idea on here. i went through all of jackson catalogs from 1990 to 2012 and i found no match. And i want a trem that i could use and not go out of tune. if i cant have that ill just deal with what i got now and not use the trem

Culler Amps

Plenty of people on here can probably identify the model, if you'll just post a pic of it. Make sure to get the headstock and entire body in the picture.

Huge Guy

Well that link you posted is for a hard tail, you know. As in "no trem bar."

I'd just stick with what you have for now and at some point upgrade to a new guitar with a Floyd Rose system.

Culler Amps

Just searched for your ID thread. Its a Jackson JS22R.

An accurate ruler is your friend when it come to finding a replacement trem.

Iplayaguitar15

Its not a js22r well atleast the neck isnt. the body looks the same but the neck isnt reversed and has dot inlays