M_16A

I received a guitar from a friend who basically ripped off the fret board on the guitar, so I was just going to replace it and make a fretless one. I was just wondering if there's anything I should be aware of while making it.

It's a 25.5 inch scale, probably 400mm radius, I want to use an ebony board but open for better choices

Thanks for the help!

__________________
"It's not about who has the biggest stick, it's about how hard you can swing it"

MG_Sora

There's not much to say, seeing as all you'll have to do is skip the fretting part of making a fretboard. In my experience, it's all about having the right tools.

Do you have any previous experience?

__________________