|01-20-2013, 04:54 PM||#21|
Grumpy Old Tech
Join Date: Oct 2009
You can program the Quadraverb's volume on a patch by patch basis in the mix section. That's what I mean by making it a programmable master volume if it is in the loop (and you will be wanting to run it in the loop). If you want you can even assign the expression pedal on the controller to target volume, turning it into a volume pedal.
It also has a global volume knob on the front (both input and output volumes). That's independent of the volume that you program into the patch.
And btw, the Quadraverb has an EQ built in. How many bands is dependent on the configuration you choose.
Here's a block diagram of how I run my rig.
Gilchrist custom guitar
Abbey Harmonic II
Marshall JTM45 clone
Marshall JCM900 4102 (modded)
Marshall 18W clone
Fender 5F1 Champ clone
|01-20-2013, 05:07 PM||#22|
UG's Krabby Patty
Join Date: May 2009
I'll try to make one of those... :P
EDIT: Hey I did it!
Call me Chris
Ducks and guitars or fish and guitars. I lead a simple existence
Last edited by IronMaiden76 : 01-20-2013 at 05:53 PM.
|Thread Tools||Rate This Thread|