Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Gear Building & Customizing
User Name  
Password
Search:

Reply
Old 01-21-2013, 08:03 AM   #1
staceap
Registered User
 
Join Date: Aug 2011
Question EMG install pot query

So I'm looking at getting an EMG KFK set for my BC Rich Warlock. It has two volumes and a control, but I'd only be looking at having a master volume (because I never need the second volume and I don't use the tone knob) and having the preamp switch in one of the other two slots.

There isn't a two-pickup diagram for just the one volume pot, so the closest I found was this (for 1 volume, 1 tone and the preamp):



Given that I don't want the tone control, would it be a case of simply plugging a coax cable from the master volume straight to the PA2? Also, would it make any difference whether I plugged that cable into the middle two pins on the volume pot or the outer two?

Cheers, guys!
staceap is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 08:21 PM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.