Rawshik

So randomly at practice I plugged my bass in and my tuner wasn't recognizing it. When I got home, I changed the battery, assuming that's the problem, but no dice. I looked in the back and the only thing that I saw fishy was a yellow cable labled as "out" on the board wasn't connected to anything. Now I don't what that cable's supposed to do nor where it goes nor do I even know if it was connected before the problem.

Can someone help me out? Is it just a simple soldering job? Any idea how much it will cost? Does this count as "warranty"?

__________________
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?

chatterbox272

Sounds like it's just a soldering job, but if your bass is under warranty then I'd get them to fix it, otherwise you'll actually ruin the warranty if you fix it yourself.

__________________

Masquerade: #19

jthm_guitarist

Post a picture

__________________

Rawshik

Pictures of the wiring:

__________________
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?

Rawshik

So should I just take it to a place for a cheap fix or would it be super easy for me to do?

__________________
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?

Sliide90027

Did that sucker pop off the Jack!?

I see Solder on one of the connection joints but NO Wire.

If the Jack does not have 2, then that is it.

I think I see the Black going out, but you need something else going out also.

__________________
Ibanez BTB 1006 Fretless and 405 (no Barts)
456 & 455(w/Barts)
Genz Benz NeoX400 112T & NeoX 112T cab.
Digitech BP-8 (x2)
Yamaha PB-1
Boss: SYB-5, PS-2, OD-20, EQ-20, PH-3,BF-3, CE-20, DD-20
Morely A/B

Rawshik

I have no idea. As I said, completely random. Should I just take it to a place?

__________________
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?

Sliide90027

Well, it does not work, and you are no longer looking at fixing it yourself, so yes.

__________________
Ibanez BTB 1006 Fretless and 405 (no Barts)
456 & 455(w/Barts)
Genz Benz NeoX400 112T & NeoX 112T cab.
Digitech BP-8 (x2)
Yamaha PB-1
Boss: SYB-5, PS-2, OD-20, EQ-20, PH-3,BF-3, CE-20, DD-20
Morely A/B

GAPendragon

Does this wiring diagram help at all? Came from the Ibanez site. This is presuming that you're talking about the bass on your profile.

__________________

Rawshik

So, according to that diagram, all I have to do is solder it back onto the input? Aight.

__________________
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?