02-20-2013, 11:10 AM
|
#1 |
|
Registered User
Join Date: Feb 2013
|
Broke pickup switch/EMG install help
I got some new EMGs for my Ibanez RG120, and despite the solderless install, I managed to screw it up. The three way toggle switch I used had horrible soldering job, and the wires snapped off immedately. Then I used my a switch from my samick guitar, and the wires are nothing like in the diagram. So my question is: What should I do? I've never soldered before, and the wires on the first switch are broken off or too short, and the second switch's wires are 4-5 wires rapped in one, like a cable. It's my only guitar right now and I wanna fix it as soon as possible. Any help at all is welcome.
|
|
|
|
02-20-2013, 12:30 PM
|
#2 |
|
Puts a bangin' donk on it
Join Date: Apr 2008
Location: Bath, Somerset
|
One thread in one forum. We don't need three threads in three different boards for the exact same topic.
__________________
Yes, I know everything. No, I can't play worth a damn. A child is trafficked and sold for sex slavery every 30 seconds. Support Love146. |
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Rate This Thread | |
|
|
All times are GMT -4. The time now is 01:34 PM.