Go Back   UG Community @ Ultimate-Guitar.Com > Instruments > Guitar Gear & Accessories
User Name  
Password
Search:

Reply
Old 02-19-2013, 07:25 PM   #1
Lazr
Registered User
 
Join Date: Aug 2011
bugera 6262 infinium

anyone have any idea how exactly to take off the back of one of these so i dont get shockd the hell out of? and also, how to solder the wire back to the board :\? if this doesn't work then im gonna go ahead and buy a peavy 6505...
Lazr is offline   Reply With Quote
Old 02-19-2013, 07:56 PM   #2
R45VT
Doesn't speak guitar
 
Join Date: Dec 2009
Location: Traffic Town LA
What?

I will say if you can't take it apart you shouldn't be messing with it.

What wire? What are you trying to get access to?
__________________
Quote:
Originally Posted by DeathByDestroyr
See, it's important that people clarify when they say "metal", because I pretty much always assume they are a Cannibal Corpse fanboi.
R45VT is offline   Reply With Quote
Old 02-19-2013, 07:58 PM   #3
ProphetToJables
Tight Tight Tight
 
ProphetToJables's Avatar
 
Join Date: Dec 2008
Location: Telford
What? You are going to have to be waaay more specific.
__________________
Gear:

Gibson 2005 Les Paul Standard
Fender Road Worn Strat w/ Noiseless pickups
Marshall JCM 2000 401C
Marshall Vintage Modern 2266
Marshall 1960A cab (Dave Hill from Slade's old cab)
Ibanez TS9DX
EHX Little Big Muff
Freshman Acoustic
ProphetToJables is offline   Reply With Quote
Old 02-19-2013, 08:09 PM   #4
Lazr
Registered User
 
Join Date: Aug 2011
there suppose to be some plastic harness inside that burnt up. look my amp blew a tube a while ago then so i replaced them but the problem is that the tubes look like there getting way to hot. i think its the some soldering inside but the people ive heard from on here say all i have to do is take the cover off and solder the burnt wires to the chip board or watever. i just need to get to the wires so i can find the burnt shit and solder the shit so it'll work again.
Lazr is offline   Reply With Quote
Old 02-19-2013, 08:09 PM   #5
FatalGear41
What Fools These Mortals!
 
FatalGear41's Avatar
 
Join Date: Oct 2009
Location: Between Here and Now
Taking the back off of the amplifier should involve nothing more than removing the screws that hold the back plate in place. As for "the wire," well; which wire is it? Are you talking about a ground wire?

Monkeying around inside of tube amps is dangerous for the noob because the capacitors can discharge without the amp being plugged in, and the zap is enough to kill you. I'd leave it to a good amplifier technician.
__________________
"It's only Rock and Roll until someone loses an eye!"

Quote:
Originally Posted by gregs1020
FatalGear41 knows the ways of the obscure. I hear it's just not with Gibsons. Beware, Halloween approaches...
FatalGear41 is offline   Reply With Quote
Old 02-19-2013, 08:16 PM   #6
311ZOSOVHJH
G G & A - B A B Y
 
311ZOSOVHJH's Avatar
 
Join Date: Mar 2008
Location: Offline
I think what he is referring to is the plastic clip that connected to the primary transformer.

If that is what you are referring to then I can assure you that problem was fixed a long time ago. You should not have that issue on the Infinium. That said, the Infinium has had a whole host of other Quality Control issues and it would be daft for us to try to trouble shoot them over the internet. If you want to play it safe you could get a matched pair of new power tubes but it is not clear if you've done that already.

You need to take your amp to a qualified amp tech. Pulling the chassis out and messing around with random wires is obviously something you should not be doing.

Info on the plastic clip issue:
http://profile.ultimate-guitar.com/BeerChurch/blog/

He has several blogs on Bugera.

Otherwise, go here:

http://www.ultimate-guitar.com/foru...t=bugera+thread

Good luck.

PS: Get a 6505 and be done with it


Edit: v....Yeah, you're right. I believe it was the 333xyz anyway
__________________

Last edited by 311ZOSOVHJH : 02-19-2013 at 10:34 PM.
311ZOSOVHJH is offline   Reply With Quote
Old 02-19-2013, 08:17 PM   #7
R45VT
Doesn't speak guitar
 
Join Date: Dec 2009
Location: Traffic Town LA
Quote:
Originally Posted by 311ZOSOVHJH
I think what he is referring to is the plastic clip that connected to the primary transformer.

If that is what you are referring to then I can assure you that problem was fixed a long time ago. You should not have that issue on the Infinium. That said, the Infinium has had a whole host of Quality Control issues so it would daft for us to try to trouble shoot that over the internet.

You need to take your amp to a qualified amp tech. Pulling the chassis our and messing around with random wires is obviously something you should not be doing.

Info on the plastic clip issue:
http://profile.ultimate-guitar.com/BeerChurch/blog/

He has several blogs on Bugera.

Otherwise, go here:

http://www.ultimate-guitar.com/foru...t=bugera+thread

Good luck.

PS: Get a 6505 and be done with it



x311


Wrong amp for the connector concern.



What makes you think the tubes are getting too hot?
__________________
Quote:
Originally Posted by DeathByDestroyr
See, it's important that people clarify when they say "metal", because I pretty much always assume they are a Cannibal Corpse fanboi.

Last edited by R45VT : 02-19-2013 at 08:21 PM.
R45VT is offline   Reply With Quote
Old 02-19-2013, 10:29 PM   #8
Lazr
Registered User
 
Join Date: Aug 2011
they smell or something smells and now any channel wont come through turns on but nothin lights up :|
Lazr is offline   Reply With Quote
Old 02-19-2013, 10:31 PM   #9
dementiacaptain
Chiefin' Son
 
dementiacaptain's Avatar
 
Join Date: Feb 2010
Location: Raleigh/Durham, NC
Take it to a tech. You are having trouble putting together coherent sentences, I really don't think you should be inside of an amp.
__________________
I am one acquainted with the night.

Gear:
Randall RM100 (Recto and XTC modules)
Gibson SG Faded
Fender "Foto-flame" Stratocaster
Ovation Balladeer (12-string)
dementiacaptain is offline   Reply With Quote
Old 02-19-2013, 10:33 PM   #10
R45VT
Doesn't speak guitar
 
Join Date: Dec 2009
Location: Traffic Town LA
Step 1:Take it in for an estimate.

Step 2: Fix it and sell it for as much money as you can.

Step 3:Buy a Peavey.


Where do you live at in world? How old is the amp?
__________________
Quote:
Originally Posted by DeathByDestroyr
See, it's important that people clarify when they say "metal", because I pretty much always assume they are a Cannibal Corpse fanboi.
R45VT is offline   Reply With Quote
Old 02-20-2013, 06:45 AM   #11
MaaZeus
Registered User
 
MaaZeus's Avatar
 
Join Date: Sep 2012
Location: Finland
Infinium is still so new that if you bought it from shop you should still have warranty left, no? Return the damn thing and either get your money back or take a new one and hope it is good.
__________________

ESP LTD F-50 + Tonezone
Cort EVL-Z4 + X2N
Cort EVL-K47B

Marshall Valvestate 8100
Randall RG1503
Peavey Valveking 100 MESA MOD

Line6 Pod X3
MaaZeus is offline   Reply With Quote
Old 02-20-2013, 06:47 AM   #12
ProphetToJables
Tight Tight Tight
 
ProphetToJables's Avatar
 
Join Date: Dec 2008
Location: Telford
What he said^ If its still in warranty, return it and get something else.
__________________
Gear:

Gibson 2005 Les Paul Standard
Fender Road Worn Strat w/ Noiseless pickups
Marshall JCM 2000 401C
Marshall Vintage Modern 2266
Marshall 1960A cab (Dave Hill from Slade's old cab)
Ibanez TS9DX
EHX Little Big Muff
Freshman Acoustic
ProphetToJables is offline   Reply With Quote
Old 02-20-2013, 06:20 PM   #13
bburritt1
Sauron Hates EMG's......
 
bburritt1's Avatar
 
Join Date: Feb 2013
Location: Garland, Texas
Yeah man put the tool down and turn it in for a warranty claim if you havent voided it allready by trying to break into your amp.

Fix it. Then sell it for the Amp you wanted....Peavey yeah thats it.
__________________
The Rig of Joy:
Stiff Amplification Dirthead 20w
Bugera 2x12 Cab
Fender Partscaster Korean Made
Epiphone Prophecy
Washburn Southern Cross 34 of 100
Ibanez TS9,AD9,GCB95, Multi Chorus and TU2
bburritt1 is offline   Reply With Quote
Reply


Thread Tools Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -4. The time now is 01:38 PM.

Forum Archives / About / Terms of Use / Advertise / Contact / Ultimate-Guitar.Com © 2014
Powered by: vBulletin Version 3.0.9
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.