XM-STD2 Review

manufacturer: Washburn date: 08/13/2014 category: Electric Guitars
Washburn: XM-STD2
For its price it's a very nice beginner axe that can be a stage guitar for a lot of guys.
 Features: 9
 Sound: 8
 Action, Fit & Finish: 8
 Reliability & Durability: 9
 Overall Impression: 9
 Overall rating:
 8.3 
 Reviewer rating:
 8.6 
 Users rating:
 8 
 Votes:
 3 
review (1) 4 comments vote for this gear:
overall: 8.6
XM-STD2 Reviewed by: Blackdogxx, on august 13, 2014
1 of 1 people found this review helpful

Price paid: $ 126

Purchased from: eBay

Features: 2014 XMSTD2TNG (tangerine is the TNG) basswood with maple and rosewood neck; 2 passive Alnico H102 model Duncan USM pickups; 4 conductor available and coil tappable if you have a luthier or skills. 1 vol, 1 tone, small pots and 3-way box switch. LP type bridge and 6 in-line tuners on headstock top. Trussrod wrench and cheap 1/4" cable. Listed as having a double trussrod, but there is a singe trussrod nut. No case or strap. Neck is clear satin and the body is nice gloss and not too thick. Body style is double horn like a lot of Schecters. // 9

Sound: Into a clean Fender Silverface '73 Princeton Reverb *(upgraded speaker and bigger power supply for headroom), it sounds good. Not great and the bridge is trebly, which can be helped by replacing the tone cap with .047 value. Rated "8" because it is versatile to cover a lot of styles. Remember: $126 new with tiny defects. Bolt on with 4 offset screws. It responds well to nail playing even with the action at nearly no neck relief. Bridge: fairly strong and on the trebly side. Neck: Somewhat bluesy and PAF character. Both have good "detail" and the bass is a bit muddy, but not bad. // 8

Action, Fit & Finish: Setup was passable and nut slots needed help on 2 strings. Too much relief, likely to stop rattling on several loose frets (not glued down well). Fixed easily. The finish was nearly perfect in all areas and the feel of the neck is nice and design features are good (rear of horn for neck strap button, black felt washers, offset small marker dots, good fretboard to neck joint. Remarkable for so cheap! Neck pocket was very clean and the cavity is neat, HBs wired with no coil tap, but easily changed over to push/pull. // 8

Reliability & Durability: This is a bolt-on neck in maple with a scarf joint (like cheap Jacksons) and rosewood or similar fretboard. Good finishing and it's a plenty sturdy guitar. Not cheaply made or shoddy in any area. It's a Washburn and they do have standards to uphold as pretty good guitars. The hardware is nice, but ordinary and the nut is "Nubone" (harder than Tusq and made from offcuts to black Tusq saddle production). Nubone cuts well for nut slots and files well for sharp corners... better than white plastic or Delrin. Sometimes you take an interest in a guitar for its design (I wanted a rock and roll guitar to take a flat fretboard, low action, looks sharp and sounds good over driven and is cheap. This is it! // 9

Overall Impression: Over all? Easily a "9"... because of the obvious: $126 in physically new condition and about $30 for a basic setup adjustment would give you a very nice beginner axe that can be a stage guitar for a lot of guys. Tangerine metallic body appeals to women so award 1/2 point for "chick magnet appeal." It's not a cheap and shoddy guitar. Both humbuckers can be coil tapped and they are the oens in the Washburn RX50, which arrives already tapped... and it's nice! At another 40-50, looks close at a Jackson JS32RT with quite nice humbuckers and a better over-all package in a different style guitar. // 9

Was this review helpful to you? Yes / No
Post your comment
More Washburn reviews rating category latest review
+ WI66PRO 8.6 Electric Guitars 04/28/2014
+ RX50 7.8 Electric Guitars 03/26/2014
+ MG40 6.2 Electric Guitars 03/04/2014
+ Rover RO10 7 Acoustic Guitars 01/15/2014
+ Cumberland J28SCE-2 4.8 Acoustic Guitars 05/29/2013
+ view all
Comments
Your captcha is incorrect