Page 3 of 3
#81
Looking good, shame about that router tearout though. Also, check your profile comments dude


You have very long jeans!
#82
a) the jeans aren't that long, they had just slipped down off the top f my hips cause I had forgot my belt
b) I never bother reading my profile, either message me there or on the forum :p
c) ampmaker kit? the PP-18 if I'm not mistaken
d) you should be ok with that amount of wire, you won't know until you plug it in and switch it on, if you do get hum poke around with a chopstick, or something long and wooden (mind. gutter. out) the hum/buzz will change if you find an issue, likely problem areas will be: the wires leading to the grids (pins 2 and 7 on V1 and 2, pins 2 on V3 and 4), the Hi-Voltage AC supply (6.3v probably isn't going to hurt)
f) I like the plaiting, i normally just twist
g) If you want a custom cab built call me, I'm looking for work :p
h) bet you didn't notice I missed out e) :p
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#83
Quote by GABarrie
a) the jeans aren't that long, they had just slipped down off the top f my hips cause I had forgot my belt
b) I never bother reading my profile, either message me there or on the forum :p
c) ampmaker kit? the PP-18 if I'm not mistaken
d) you should be ok with that amount of wire, you won't know until you plug it in and switch it on, if you do get hum poke around with a chopstick, or something long and wooden (mind. gutter. out) the hum/buzz will change if you find an issue, likely problem areas will be: the wires leading to the grids (pins 2 and 7 on V1 and 2, pins 2 on V3 and 4), the Hi-Voltage AC supply (6.3v probably isn't going to hurt)
f) I like the plaiting, i normally just twist
g) If you want a custom cab built call me, I'm looking for work :p
h) bet you didn't notice I missed out e) :p

a) Fair enough
b) Okie cokes, I'll remember that cheers.
c) The very same!
d) That's good to know then
f) I wa sjust imagining I was playing with a pretty girls hair at the time
g) I would love to, but I'm short on cash and I'm not unemployed! I'll manage to build one though once I've decided on speakers and tolex (Animal print of some sorts? )
h) No I didn't, well done!
i) Do I use too many smilies? I was going to use more than I actually used here, but I held myself back.
#84
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#85



Anyway, can't wait to see this finished!


Edit: Wait, were you implying that I should use llama print tolex? If you were, I didn't mean "Nah, I'd prefer cat skin".
Last edited by whoomit at May 25, 2012,
#86
haha, llama print tolex would be awesome, personally I like (one of the builds on this forum)
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#87
#88
hello you sexy people, probably mainly von lazy as you've asked for updates

this is all I have for you, sexy as **** though



That's the first coat I've put a second on since that didn't like the recent heat so much so bubbled a little so I'm gonna need to sand that back with some fine grit before putting the next coat on, also have some serious heavy duty painters tape that is meant to be super effective at stopping seepage under the tap for the neck, expect more updates as the weather holds
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#91
disagree!
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#93
I'm pretty much full blown amp tech these days, I'm even getting the shop to repair my LP instead of having a go myself
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#94
I actually rather like that body shape, and nice-looking neck. Looking forward to future updates
#95
Finally got chance to work on this again!

Just got the final coat on the body and started varnishing the cavity cover, will cut it out before putting a second and final coat on.

Can't do the neck today as I've forgotten my painters tape. But I may attempt a coat on the headstock so there's an extra coat for the walnut veneer on it.
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#97
Looks nice so far!
Quote by treborillusion
Low end Epiphone = fire wood.

LTD Surveyor 4
Kramer Imperial
Engl Gigmaster E315
Marshall 1936 JCM900 lead cab
My website
#98
I like that body shape, but what happened to the tapers you had in this pic?
Quote by GABarrie



I liked the tapers. Reminded me of a JP6.
#99
my wife decided she wanted roundovers after I had done the back, didn't complain, the roundover was much much easier than taking all that bevel out with a rasp
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
#100
I always forget what a nice body shape that is until I see it. It seems like a shape that should look horrible (to me anyway) but then it actually looks fantastic for some reason
#101
Doing a final sand and buff of the finish today and getting the neck oiled. Also gonna see if I can fix the neck pocket to sort out alignment without making it too loose, we'll see how that goes!
Epiphone Les Paul Plus Top
Jet City JCA5212RC (SLO Modded)
Ibanez WD7 Wah
Mad Professor Sweet Honey Overdrive
TC Electronic Flashback Triple Delay
TC Electronic Trinity Reverb
Page 3 of 3