#1
Basically all I want to do is have a pedal with a guitar volume pot in it so that I can drive my single channel amp hard and then get cleans by having a volume pot in a pedal, like rolling down the volume on the guitar. Will this circuit do what I want?

#3
should work
Quote:
Hey Im Looking For Some Tech Death Metal In D

Quote:
try anything form avenged sevenfold

I lol'ed.

Quote by Basti95
inb4 everyone else, well played
#6
you may want more resistance there, like 300-500 ohms or so. And if the switch poles connects horizontally (instead of vertically) then should work. I would have grounded the 9 volt -ve terminal but im not sure if there is really any benefit to doing so!
Last edited by michaelbot9000 at Nov 11, 2012,
#7
Quote by michaelbot9000
you may want more resistance there, like 300-500 ohms or so. And if the switch poles connects horizontally (instead of vertically) then should work. I would have grounded the 9 volt -ve terminal but im not sure if there is really any benefit to doing so!


Hi,
what do you mean by grounding the -ve terminal?

and about the resistor, I emailed the place I bought the LED from about the max current, so the value of the resistor may be changed.