I recently decided to go with this combination, but I'm a little confused regarding Ohms/Wattage. Super beginner question, I know. Anyway here are the specs on the cab:

Speakers: 4 Celestion G12T-75
Power: 300 watts
Mono/Stereo selectable
Stereo Impedance: 8 ohm
Mono Impedance: 16/4 ohm

On the back of the Bogner, there are three outs:

B (2 outs): Connect 8 Ohm pair OR 4 Ohm single
A (1 out): 8 Ohm out (16 Ohm OK)

I understand the very basics of impedance, resistance, and wattage, but the way this should be connected is a little confusing to me -- should I connect the head's two B outs to the cab's L/R inputs set at stereo?

Lastly, will the head being 40W and the cab being 300W pose any problems? I've read that using an amp with a lower wattage than the cabinet is fine, but I just want to be sure.

Thanks for your help!
Last edited by charles? at Dec 4, 2012,
Connect the Mono impedance (4ohm) of your cab to the B 4ohm out of your amp. No problems at all with wattage.

Mesa Royal Atlantic
Orange Rocker 15
Marshall Class 5C
Emperor 4x12 Silver Bells
Yamaha THR10
PRS Swamp Ash Limited Custom 24
LTD Viper 500 with Duncans