Page 2 of 2
#42
^ Thanks!

I'm hoping to get this thing back from finish later today or tomorrow then I can get her together and ready to go.

I decided I did not like the three piece design of the humbucker bobbins. They were not as clean as I wanted so I re-made all four. This time they are one piece solid ebony and I am much happier with them!


#43
Quote by \m/slipknot\m/

The cover is plenty secure and will not move even when shaking the guitar with all your strength. If you hit the guitar hard enough to make the cover come off then you have bigger repair issues to worry about. No more screws to strip or lose and its a much cleaner look.


Not to go back in time too much, but what kind/where did you get the magnets?
#45
Quote by BirdRiverCustom
Not to go back in time too much, but what kind/where did you get the magnets?


I cant find the exact site I used because I ordered them so long ago, but this site seems to have the sizes you would need

http://www.kjmagneti...ucts.asp?cat=10

I use all 1/4" diameter. 1/8" thickness for the cavity cover, 1/16" for the truss cover
#46
Quote by \m/slipknot\m/
I cant find the exact site I used because I ordered them so long ago, but this site seems to have the sizes you would need

http://www.kjmagneti...ucts.asp?cat=10

I use all 1/4" diameter. 1/8" thickness for the cavity cover, 1/16" for the truss cover


You're the man! Thanks for the link, im gonna check it out for sure, thanks for the size recommendations.
#47
Awesome fingerboard, man. Really adds something fresh to the table.
Quote by Axelfox
Please understand how little we as a community care
#48
Any recommendations where I can buy pale moon ebony fingerboards? I can't find even a single site.
#50
Quote by W4RP1G
Any recommendations where I can buy pale moon ebony fingerboards? I can't find even a single site.



Here ya go sir. They sell a bunch of different sizes but if you have the tools to cut bigger blanks down its definitely worth the money

https://www.cookwoods.com/lumber-site/shop/category/black-white-striped-ebony/
#52
The pickups look clean man.
Guitars:
Ibanez UV777P
Ibanez RGD2127FX
Ibanez RG3120TW
Ibanez RGD7421
Ibanez SA160
Amps:
Baron Custom Amps K88
Randall RM100
Madison Divinity II
Cabs:
Mesa 4x12
Bogner 4x12
H&K 4x12
Page 2 of 2