Page 2 of 2
DESTROYER5000
Banned
Join date: Dec 2012
835 IQ
#41
Well once again the plywood was free so the way I look at it, if I screw up on the build then I didn't waste my money, right?
W4RP1G
Please, call me Pig.
Join date: May 2010
2,847 IQ
#43
Quote by DESTROYER5000
Well once again the plywood was free so the way I look at it, if I screw up on the build then I didn't waste my money, right?


Yeah, that works both ways. On the one hand, if you screw up the guitar then you didn't lose too much money. On the other hand, if you don't screw up the guitar, then you've spent a lot of time building a plywood guitar.

Personally I would choose a good wood because I'd rather risk losing a bit of money than a lot of time and effort. And planning for failure rather than success is a bad idea in this case, you have more to lose that way.
DESTROYER5000
Banned
Join date: Dec 2012
835 IQ
#44
Ok w4rp1g I recently deleted a thread and made a new one and on the new one i am getting unfathomable amounts of flak for deleting the old one now what?
W4RP1G
Please, call me Pig.
Join date: May 2010
2,847 IQ
#45
Quote by DESTROYER5000
Ok w4rp1g I recently deleted a thread and made a new one and on the new one i am getting unfathomable amounts of flak for deleting the old one now what?

I have no idea what you're talking about.
DESTROYER5000
Banned
Join date: Dec 2012
835 IQ
#46
I deleted a thread I made after I had called out a troll and everything went downhill so I deleted the thread and I am now being called an idiot and a little b$&@& because I deleted it what should I do?should I delete the new thread? If you want to see what I'm talking about go the thread funniest thing that ever happened to you in a music store.
W4RP1G
Please, call me Pig.
Join date: May 2010
2,847 IQ
#47
Dude, stop posting in the Pit. Most people there are assholes, and they have a mob mentality thing going on where they love to gang up on people.

But it's not all their fault, you make it too easy for them to get to you. So basically, grow a thick skin, work on your grammar(I'm not being a dick, your grammar is terrible and it's really hard to figure out what you're saying sometimes), and just stick to posting in the instrument forums.

And don't even read that thread anymore, no good can come from it.
DESTROYER5000
Banned
Join date: Dec 2012
835 IQ
#48
Ok thank you very much. I swear 90 percent of my bad grammar is the stupid auto-finish setting that I cannot figure out how to turn off.
halfj06
Registered User
Join date: Dec 2009
565 IQ
#50
Step 1. Ignore the pit.. these are the same children that if you've ever played an online video game.. are the super annoying ones on a headset screaming obscenities and bding annoying.

Step 2: guitar + plywood = no. Im not trying to be a jerk but I'm not going to sugar coat this. Its going to look, feel, sound and play like garbage. Not to mention how quick it will likely fall apart. If you used that wood to make a template for a body before using real wood that would be ok but its just not worth your ti
e
Mephaphil
No empty frets.
Join date: Apr 2012
1,956 IQ
#51
Lol, the Pit.

I believe they call it a Baptism of Fire, Destroyer.

My grammar is dictated by my fingers. Commas and periods are easily entered, in fact most auto correction programs promote it.

It's pretty obvious why people might get a bit pissed if you delete a thread. If you have a thread and you get flamed in it, and then you delete it well, it kinda makes you look a bit like you can't take the shit you've gotten. It's a bit like hosting a party and then a few minutes later shutting it down because a few people insulted you or whatever, people will be pissed at you and they'll gang up on you because there's more of them.

Also, just because you started the thread it doesn't make it yours. It's not really good etiquette to close a thread because you don't like what people are saying, that's a moderators job.

Everything that W4RP1G said is accurate.

This comes from a well meaning place.
Quote by Shredwizard445
Go ahead and spend your money, I don't care. It won't make you sound better.


Quote by Shredwizard445
Sure upgrading your gear will make you sound better.


Last edited by Mephaphil at Jan 18, 2013,
T00DEEPBLUE
Boba FRETT
Join date: Oct 2010
2,246 IQ
#52
So what if the pit ragged you? The pit isn't that bad of a place, you were just getting butthurt over people heckling you for bad grammar and spelling. It's the freaking internet, man. Get over it.
Regarding the furry fandom from the man himself:
Quote by Axelfox
Please understand how little we as a community care
Last edited by T00DEEPBLUE at Jan 18, 2013,
Mephaphil
No empty frets.
Join date: Apr 2012
1,956 IQ
#53
Quote by T00DEEPBLUE
So what if the pit ragged you? The pit isn't that bad of a place, you were just getting butthurt over people heckling you for bad grammar and spelling. It's the freaking internet, man. Get over it.


Basically, This.
Quote by Shredwizard445
Go ahead and spend your money, I don't care. It won't make you sound better.


Quote by Shredwizard445
Sure upgrading your gear will make you sound better.


W4RP1G
Please, call me Pig.
Join date: May 2010
2,847 IQ
#55
Quote by halfj06
Step 2: guitar + plywood = no. Im not trying to be a jerk but I'm not going to sugar coat this. Its going to look, feel, sound and play like garbage. Not to mention how quick it will likely fall apart. If you used that wood to make a template for a body before using real wood that would be ok but its just not worth your time

A lot of that that is exaggerated, or even untrue. I'm not saying he should build a plywood guitar, but it will work if he wants to do that(assuming that he doesn't try to use pylwood for the fretboard).

Yes, plywood looks ugly, but painting the guitar takes care of that. And despite popular belief, the guitar won't sound dead and lack all sustain, but the glue will affect the sustain and tone. And I don't see any reason why it wouldn't play just fine. Also, it most certainly will not fall apart with time.

Basically, it comes down to ideals. I believe if someone is spending so much time building something, then they should try to build the best instrument that they can [reasonably] build. It makes no sense to invest so much into something made from plywood if better woods are available.
azrael4h
Registered User
Join date: Nov 2012
215 IQ
#57
Quote by halfj06
Is the plywood even thick enough for a guitar body?


Looks like he's gluing a couple sheets together, then making the body from that.

I think if I wanted to build one, it'd be solid wood, but whatever floats your boat.
DESTROYER5000
Banned
Join date: Dec 2012
835 IQ
#58
Quote by azrael4h
Looks like he's gluing a couple sheets together, then making the body from that.

I think if I wanted to build one, it'd be solid wood, but whatever floats your boat.


2 sheets of 3/4" cherry plywood. The neck I'm using is from another guitar.so, no I'm not using plywood as the fretboard, and why does everyone say plywood is gonna make crap guitar?
Last edited by DESTROYER5000 at Jan 20, 2013,
nickurman
Registered User
Join date: Feb 2015
10 IQ
#59
Quote by DESTROYER5000
Also what has everyone heard about about dragonfire guitar pickups cause i want to by the quad rail humbuckers

yes , they actually are great
dspellman
Registered User
Join date: Jan 2012
1,110 IQ
#60
This is a 2013 thread...
Last edited by dspellman at Nov 29, 2015,