#1
So randomly at practice I plugged my bass in and my tuner wasn't recognizing it. When I got home, I changed the battery, assuming that's the problem, but no dice. I looked in the back and the only thing that I saw fishy was a yellow cable labled as "out" on the board wasn't connected to anything. Now I don't what that cable's supposed to do nor where it goes nor do I even know if it was connected before the problem.

Can someone help me out? Is it just a simple soldering job? Any idea how much it will cost? Does this count as "warranty"?
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?
#2
Sounds like it's just a soldering job, but if your bass is under warranty then I'd get them to fix it, otherwise you'll actually ruin the warranty if you fix it yourself.
#3
Post a picture

Quote by emad
jthm_guitarist
Warned for trolling!


Quote by metal4eva_22
Didn't you say that you had a stuffed fox that you would occasionally fuck?

Quote by Axelfox
It's not a fox,it's a wolf.
#4
Pictures of the wiring:
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?
#5
So should I just take it to a place for a cheap fix or would it be super easy for me to do?
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?
#6
Did that sucker pop off the Jack!?

I see Solder on one of the connection joints but NO Wire.

If the Jack does not have 2, then that is it.

I think I see the Black going out, but you need something else going out also.
Ibanez BTB 1006 Fretless and 405 (no Barts)
456 & 455(w/Barts)
Genz Benz NeoX400 112T & NeoX 112T cab.
Digitech BP-8 (x2)
Yamaha PB-1
Boss: SYB-5, PS-2, OD-20, EQ-20, PH-3,BF-3, CE-20, DD-20
Morely A/B
#7
I have no idea. As I said, completely random. Should I just take it to a place?
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?
#8
Well, it does not work, and you are no longer looking at fixing it yourself, so yes.
Ibanez BTB 1006 Fretless and 405 (no Barts)
456 & 455(w/Barts)
Genz Benz NeoX400 112T & NeoX 112T cab.
Digitech BP-8 (x2)
Yamaha PB-1
Boss: SYB-5, PS-2, OD-20, EQ-20, PH-3,BF-3, CE-20, DD-20
Morely A/B
#9
Does this wiring diagram help at all? Came from the Ibanez site. This is presuming that you're talking about the bass on your profile.
Quote by FatalGear41
Bassists don't hover on the forum day and night like guitarists. We've got lives to lead, music to play and whiskey to drink.

Quote by Ziphoblat
I'd rather go at my hands with a hacksaw than play lead guitar, and I'm only slightly exaggerating.
#10
So, according to that diagram, all I have to do is solder it back onto the input? Aight.
For how can I give the King his place of worth above all else
when I spend my time striving to place the crown upon myself?
#11
It looks like it to me but I'm certainly not an expert.
Quote by FatalGear41
Bassists don't hover on the forum day and night like guitarists. We've got lives to lead, music to play and whiskey to drink.

Quote by Ziphoblat
I'd rather go at my hands with a hacksaw than play lead guitar, and I'm only slightly exaggerating.