Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#1
So after playing with some really high action(due to string gauge increase) for a while I've decided to do something about it,. I want to adjust my trussrod, but before I do I have one question, how immediate will the effects of a trussrod adjustment be? Will I have to do a 1/8 turn then wait for it to take effect? or is it noticeable near immediately?
Quote by R45VT
Bastards.
Roc8995
Moderator
Join date: Nov 2005
250 IQ
#2
It will do something right away but you need to give it a while to settle. I usually do 30 minutes between 1/4 turns and any more than 2 of those and I leave it overnight before adjusting more.
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#3
Now I hav a question about adjusting my action at the bridge, the relief seems appropriate via the distance from the 7-9th frets, but I'd still like the strings a tad lower, would adjusting my bridge lower do that? and if so, how would I go about adjusting my bridge height, it's a floyd that I blocked, would I need to loosen the strings first?
Quote by R45VT
Bastards.
hminh87
Justin here!
Join date: Apr 2007
340 IQ
#4
The overall action depends on string height at bridge and nut together with the amount of neck relief. Lowering the bridge will lower the action toward higher frets but might result in buzzing and dead frets. The nut is a bit harder to adjust but if you think its uncomfortable to fret down at the lower frets then you might want to consider to lower it.

My way of set up a guitar is to first get the neck a slight relief then adjust the bridge height according to the nut height util I find a sweet spot.

Remember to not overwork the neck too much. Even a simple task such changing the strings will require the guitar a short while to adjust it self after the changed tension. Best to give it 30 min in between adjustment.
G͔͓̅e͎͉̟̽ͬ͐̎̃͐ͨͅå͈͖͕̹̤̟̐̏͋ͅr̩͕̫̰̗s̹̳̼ͥ̒̍̄̅ͥ̚:


ESP Standard Eclipse I CTM VW
ESP LTD Deluxe H-1001
ESP LTD Deluxe Viper-1000 STBC
ESP Edwards E-EX-100STD
Warmoth Paulcaster "Tiger"
Tanglewood TW170 AS
Vox Tonelab ST
Blackstar HT-1R


Last edited by hminh87 at Feb 7, 2013,
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#5
Hate to bring this back, but i"ve been doing the 1/4 turns every half hour twice a day, but my action seems to be doing nothing, like literally not a single thing has happened. Would it be possible for me to lower my bridge? It's a floyd rose special, if I do lower it do I have to take the tension off of my strings first?
Quote by R45VT
Bastards.
Bhaok
The evil old man
Join date: Feb 2005
20 IQ
#6
The truss rod is for adjusting neck relief only. If you are wanting to raise and or loser the action that is a function of the nut and bridge.
Bhaok

The following statement is true. The proceeding statement is false.
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#7
The neck relief hasn't changed either, and wouldn't the action be affected by the amount of bow in the neck anyway?
Quote by R45VT
Bastards.
hminh87
Justin here!
Join date: Apr 2007
340 IQ
#8
You DO NOT adjust action with the truss rod. It's either at the bridge or nut. Since you cannot do anything to the nut at your level, the only thing you can do is to adjust the bridge height by turning the bridge posts which are holding the bridge.

The truss rod is for neck relief ONLY. Do this: Fret the 1st and 15th fret. Check if there is any gap between the string and the fret at 7-9th fret. If you can slide a credit card through without touching the string then it's way too high. Vice versa, if there is no gap then you have too little relief. Turn the truss rod to the right to reduce the relief, to the left to increase it.
G͔͓̅e͎͉̟̽ͬ͐̎̃͐ͨͅå͈͖͕̹̤̟̐̏͋ͅr̩͕̫̰̗s̹̳̼ͥ̒̍̄̅ͥ̚:


ESP Standard Eclipse I CTM VW
ESP LTD Deluxe H-1001
ESP LTD Deluxe Viper-1000 STBC
ESP Edwards E-EX-100STD
Warmoth Paulcaster "Tiger"
Tanglewood TW170 AS
Vox Tonelab ST
Blackstar HT-1R


Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#9
Quote by hminh87
You DO NOT adjust action with the truss rod. It's either at the bridge or nut. Since you cannot do anything to the nut at your level, the only thing you can do is to adjust the bridge height by turning the bridge posts which are holding the bridge.

The truss rod is for neck relief ONLY. Do this: Fret the 1st and 15th fret. Check if there is any gap between the string and the fret at 7-9th fret. If you can slide a credit card through without touching the string then it's way too high. Vice versa, if there is no gap then you have too little relief. Turn the truss rod to the right to reduce the relief, to the left to increase it.

The relief rather high still, as in you could drop a couple credit cards through it with minimal effort. To increase relief you turn CCW right?
Quote by R45VT
Bastards.
Last edited by Viban at Feb 15, 2013,
hminh87
Justin here!
Join date: Apr 2007
340 IQ
#10
Think of it this way.
The strings will pull the neck toward it's side because of the tension. The neck will tend to bend upward. The truss rod is put in place to counter it and force the neck downward.

The mechanic of the truss rod is rather simple:
Tighten - Force the neck bends downward - Less relief
Loosen - Less downward force and let the string pulls more. The neck bends upward - more relief

In your case of having too much relief you want to DECREASE it by tightening the truss rod. Turn it clockwise. A neck relief between 0.1-0.5mm is considered to be the sweet spot for many people.
G͔͓̅e͎͉̟̽ͬ͐̎̃͐ͨͅå͈͖͕̹̤̟̐̏͋ͅr̩͕̫̰̗s̹̳̼ͥ̒̍̄̅ͥ̚:


ESP Standard Eclipse I CTM VW
ESP LTD Deluxe H-1001
ESP LTD Deluxe Viper-1000 STBC
ESP Edwards E-EX-100STD
Warmoth Paulcaster "Tiger"
Tanglewood TW170 AS
Vox Tonelab ST
Blackstar HT-1R


Last edited by hminh87 at Feb 15, 2013,
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#11
Quote by hminh87
Think of it this way.
The strings will pull the neck toward it's side because of the tension. The neck will tend to bend upward. The truss rod is put in place to counter it and force the neck downward.

The mechanic of the truss rod is rather simple:
Tighten - Force the neck bends downward - Less relief
Loosen - Less downward force and let the string pulls more. The neck bends upward - more relief

In your case of having too much relief you want to DECREASE it by tightening the truss rod. Turn it clockwise. A neck relief between 0.1-0.5mm is considered to be the sweet spot for many people.

I know the physics behind the neck and what a trussrod does, I also know what relief is. Would I not want to increase my relief seeing as I jumped from a .10-.46 set to a .10 to .60 set and I have so little relief that I'm at more like 1 mm of space between the string and the fret when I push down the strings.

Not to sound like I'm being snippy, but what I asked is which direction I turn my trussrod to add relief, and whether or not I need to remove my strings to adjust my bridge. I know how to turn the thing and I know what it does.

Considering I liked the action before I went up string gauge, and it was much lower then I can only assume my problem is neck relief seeing as I haven't touched the bridge. Not sure where having too much relief came from seeing as that would imply I have rearward bow. or that there is no space in between the 7-9 frets and the string and I have at least 1mm there.
Quote by R45VT
Bastards.
Last edited by Viban at Feb 15, 2013,
hminh87
Justin here!
Join date: Apr 2007
340 IQ
#12
Yep. Loosen the strings before adjusting. Removing is not unnecessary. As long as they are not at full tension.

You are jumping to a heavier string gauge. That means more tension and more forward bow. You want to tighten the truss rod to compensate for the added tension.

1mm neck relief is quite a lot, you know. You want somewhere between 0.1-0.5mm.
G͔͓̅e͎͉̟̽ͬ͐̎̃͐ͨͅå͈͖͕̹̤̟̐̏͋ͅr̩͕̫̰̗s̹̳̼ͥ̒̍̄̅ͥ̚:


ESP Standard Eclipse I CTM VW
ESP LTD Deluxe H-1001
ESP LTD Deluxe Viper-1000 STBC
ESP Edwards E-EX-100STD
Warmoth Paulcaster "Tiger"
Tanglewood TW170 AS
Vox Tonelab ST
Blackstar HT-1R


Last edited by hminh87 at Feb 15, 2013,
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#13
Well now that I've had a couple question answered I will ask again, which direction do I turn my trussrod in order to increase my relief?

1mm is the space between my strings and the 7-9th frets, that is why I'm attempting to set it properly.
Quote by R45VT
Bastards.
EddieHet
Registered User
Join date: Sep 2012
10 IQ
#14
Quote by Viban
Well now that I've had a couple question answered I will ask again, which direction do I turn my trussrod in order to increase my relief?

1mm is the space between my strings and the 7-9th frets, that is why I'm attempting to set it properly.


Dude, press the 1st and 15/16/last fret on the low E string.If you do so and there is still a 1mm gap between 7-9 frets, you want to DECREASE the relief on your guitar (by turning the truss rod clockwise).
Do you feel like I do!?
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#15
Quote by EddieHet
Dude, press the 1st and 15/16/last fret on the low E string.If you do so and there is still a 1mm gap between 7-9 frets, you want to DECREASE the relief on your guitar (by turning the truss rod clockwise).

Well it would appear I have my understanding of relief backwards, and that less relief would mean less space between the frets. Makes no sense to me but I guess that's the way it is.

I went to the for dummies page to figure out which way to turn my trussrod since nobody would tell me which way to turn it to increase, or decrease my relief.
Quote by R45VT
Bastards.
Last edited by Viban at Feb 16, 2013,
progdude93
Banned
Join date: Dec 2012
20 IQ
#16
Wow. First of all, there's no reason to get snippy, because nobody here owes you shit. Second of all, someone DID tell you which way to turn it:

Quote by hminh87

In your case of having too much relief you want to DECREASE it by tightening the truss rod. Turn it clockwise. A neck relief between 0.1-0.5mm is considered to be the sweet spot for many people.


So stop bitching. Be appreciative.
Viban
UG's resident bum
Join date: Nov 2011
150 IQ
#17
Quote by progdude93
Wow. First of all, there's no reason to get snippy, because nobody here owes you shit. Second of all, someone DID tell you which way to turn it:


So stop bitching. Be appreciative.

Guess who's gone and made an ass of themselves again. This ones on me guys *bows awkwardly*.

I never said I was owed anything nor did I insinuate it. Start fights elsewhere.

I thank those who contributed an answer for what they said.
Quote by R45VT
Bastards.
Last edited by Viban at Feb 16, 2013,