Gerard_xD
-
Join date: Feb 2010
684 IQ
#1
My pickup selector works for middle and neck, but not for the bridge position. It's happened before, but usually switching it a few times makes it work again. That doesn't seem to be happening this time.

Basically, I was just wondering if this is an easy & cheap fix/a common problem?


ecvMatt
clamper
Join date: Oct 2008
36 IQ
#2
You may want to start with some contact cleaner.
Quote by CodChick


Seriously, I'm not a fan of iphones and guitars mixing.
GOLDIE93
Registered User
Join date: Sep 2007
389 IQ
#3
Open the cavity and spray some compressed air into switch, while toggling back and forth. If that doesn't help, then just replace the switch. usually an easy repair if you know how to solder. Cheaper switches tend to wear out easily.
YA GOTTA HIT IT ON THE ONE
pics of gear updated on profile 11/16/09