Oyface
**** seagulls
Join date: Apr 2008
145 IQ
#1
Hello!

I have a Squier jazz bass, white one, which I want to repaint.

The parts I want to repaint are the body, the pickguard, and the knobs and such.


What I want to know is what's the best way to cover up my pickups. Don't want to ruin them.

Also going to reshape the pickguard somehow. Any tips on how I should cut it?
Quote by StewieSwan
Sex changes? That's pretty gay


Quote by jakesmellspoo
if you took a bite out of an ebola patient, you'd probably end up with ebola.


SwaggleyKubrick
Svengali
Join date: Nov 2012
10 IQ
#2
even if you're going to paint the pick guard the same color, you should still take it off in order to paint, and when you do its super simple to unscrew the pickups from the guard.

and in regards to painting the pick guard, remember its plastic and certain types of paint aren't likely to stick.
funkbass369
UG Senior Member
Join date: Feb 2007
51 IQ
#3
take your pickups out.
MM Stingray
MIA P Bass
MIM Jazz Bass
GK 700RB-II Head
GK 410SBX Cab
Sansamp 3 Ch. DI
Crybaby Bass Wah
Bass Big Muff
DD3 Delay

MIA Strat
Nashville Tele
Martin 00015M
Hot Rod Deluxe
Big Muff
DS1
Hendrix Crybaby Wah
anarkee
oh the horror!
Join date: Aug 2006
330 IQ
#4
I would just buy a pick guard in the color you want rather than repaint it. There are plenty of businesses on the internet that sell custom pickguards in a variety of colors and styles.
Battery Chicken
Viva la Revolucion!
Join date: Aug 2006
60 IQ
#5
I've researched it but never actually done it. Here's what you're going to need to do.

1. Pull off the strings, pickguard, jack, bridge and neck (and anything else)
2. Use heat gun or paint stripper to remove the current finish. - There's pluses and minuses to either method
3. Sand off an excess paint
4. Use a hanger to suspend the body above the ground.
5. Apply a primer
6. Spray on the paint - wait to dry and apply as many coats as necessary to get the effect you want.
7. Sand back any rough bits using high grit (1000+)
8. Apply a few coats of laquer if you want that shiny look.
9. Sand (hi-grit)and buff to a gloss

10. Buy a new pick guard, paint will just flake off.
11. Solder up your bits and pieces (
12. Before reassembly hook up your amp and test your volume, tone knobs and pups by tapping on them with a screwdriver.
13. Reassemble, restring and pray to god that you haven't ****ed something up.
CJ Noble
WAHAHA~!
Join date: Jan 2008
40 IQ
#6
remove everything before you paint it, don't even think about painting a loaded guitar
1978 Peavey T-40 -> Ampeg Micro-VR - > Ampeg SVT210AV + Ampeg SVT-15E