I got some new EMGs for my Ibanez RG120, and despite the solderless install, I managed to screw it up. The three way toggle switch I used had horrible soldering job, and the wires snapped off immedately. Then I used my a switch from my samick guitar, and the wires are nothing like in the diagram. So my question is: What should I do? I've never soldered before, and the wires on the first switch are broken off or too short, and the second switch's wires are 4-5 wires rapped in one, like a cable. It's my only guitar right now and I wanna fix it as soon as possible. Any help at all is welcome