#1
Hi guys,
I wanted to try out something different so I decided to move my EMG 81/85 set from my ltd viper to my jackson rr5 just for fun.
I ran into many problems wiring.

The input jack was far away from the control cavity so I had to cut off wires and resolder longer bits of wire.
The solderless system has these black clips at the end that clips into the pickups. They were too big to fit through the small holes of the pickup cavity, so I cut it in the middle and I saw that the thick white wire has small metal wires and a small white wire in the middle. So there are two wires in one. I cut it, and now I cannot connect it properly, what do I do now?
Cheers