#1
Hello! I know very little about pickups and stuff, but I had a question... How do I get the effect he gets at 2:20 in this video.

I have this same guitar with 2 pickups... I want to record like this... Would a 2 channel USB interface work to record like this?
Like the Focusrite Scarlett 2i2.
Would this one work? Is this, indeed, 2 channels? Do I need 2 channels to do this...?

Forgive my ignorance, I have never played with electric acoustics before I bought this guitar just the other day.

But, it is a super cool effect and would love to use it in recording some of my music!
#2
A 2 channel interface like that would indeed suffice for this if you want to have two individual tracks from each pickup. If I understand what he was saying right, you can get the same effect by blending on the guitar with a single output.

All he did was pan out each pick up hard left and right which widens the stereo image.
Let's party.
#3
Ah, I think I understand now! Thanks you very much.

I assumed the panning was done on the interface. So the panning can be set on the preamp and then all put into one track by blending it, is that right, or something like that? :]

This electronic stuff is a whole new element for me!
#4
What you'll do is create two audio tracks in your recording software(some software can have a stereo track, but it's easier to do separate two mono tracks), then you'll set the input of the first track to be input 1, and the second track to be input 2.

Then once you've recorded the two mono tracks, you grab the pan knob on each track in the software, and turn it as far left or right as you'd like to get that stereo separation.

Personally, I don't pan hard, I usually only pan part of the way in each direction so there's some common ground in the center of the song. Of course that's all up to your taste, try everything and see what your ears like best!

Does that make sense? I can try to be clearer if you'd like!
Telecaster - SG - Jaguar
Princeton Reverb, Extra Reverb
P-Bass - Mustang Bass
Apogee Duet 2 - Ableton Suite
#5
Nope, that is excellent!

Would I be able use the Focusrite Scarlett 2i2 to record the 2 tracks at the same time, then go into my Garageband and manually pan each track?

(I agree, it would be kinda funny to fully pan both to each of their sides... I could only imagine someone listening with one earbud in, going, "Wahh...??? O_O ")

#6
Quote by Isakale
Nope, that is excellent!

Would I be able use the Focusrite Scarlett 2i2 to record the 2 tracks at the same time, then go into my Garageband and manually pan each track?

(I agree, it would be kinda funny to fully pan both to each of their sides... I could only imagine someone listening with one earbud in, going, "Wahh...??? O_O ")


Yep, that will work just fine going into garageband.

Lots of people do pan hard left and right, and it does work pretty well depending on the context. Go listen to some of the first stereo Beatles recordings, I think you'll find those pretty interesting
Telecaster - SG - Jaguar
Princeton Reverb, Extra Reverb
P-Bass - Mustang Bass
Apogee Duet 2 - Ableton Suite
#8
AVOID THE 2i2!!!!

The 2i2 has no pad, and is well known to clip badly when you run DI (plugging directly into the interface). The 2i4 is what you need (or other 2 channel interface with a pad).
#9
Forgive my ignorance, I really know extreme little about this stuff...
I canceled my order, so luckily I did not pay for it. Phew!

What is a pad? What does it do and how will it effect my recording? Thanks so much for warning me!!!
#10
It allows hotter signals to be recorded without clipping (distorting)
All I want is for everyone to go to hell...
...It's the last place I was seen before I lost myself



Quote by DisarmGoliath
You can be the deputy llamma of the recordings forum!
#11
WOW, that sounds important!
I guess if I am already paying $100, I may as well make it $200 for something that will not clip... :P
#12
Someone was telling me I need a direct box. What is that and do I need one?
#13
You don't...
All I want is for everyone to go to hell...
...It's the last place I was seen before I lost myself



Quote by DisarmGoliath
You can be the deputy llamma of the recordings forum!
#15
Every studio needs a DI.
It changes the current and voltage of, in your case, guitar signal.
It also increases the distance the signal can travel.
#16
If you're recording at home, with a Scarlet 2i4, please explain when and why a new hobby recording engineer would need a DI box?
All I want is for everyone to go to hell...
...It's the last place I was seen before I lost myself



Quote by DisarmGoliath
You can be the deputy llamma of the recordings forum!
#17
Yep, just a little home recording project for now. Thanks so much guys!
#18
Quote by Isakale
Nope, that is excellent!

Would I be able use the Focusrite Scarlett 2i2 to record the 2 tracks at the same time, then go into my Garageband and manually pan each track?

(I agree, it would be kinda funny to fully pan both to each of their sides... I could only imagine someone listening with one earbud in, going, "Wahh...??? O_O ")



The sound will be exactly the same, unless you record different mics/amps. Record the same part twice then pan.

As to what you wrote in parenthesis..have you ever listened to music from the 70's and previous decades?

The "Re-incarnation of Plato" Award 2009
(most intelligent)
The "Good Samaritan" Award 2009 (most helpful)

[font="Palatino Linotype
Who's Andy Timmons??
#19
How can i record my guitar on my laptop when i only have a line out port in my laptop?
#20
Quote by theone64
How can i record my guitar on my laptop when i only have a line out port in my laptop?


You don't.

You buy an interface of some description. Check the sticky.
All I want is for everyone to go to hell...
...It's the last place I was seen before I lost myself



Quote by DisarmGoliath
You can be the deputy llamma of the recordings forum!