#1
Hi guys
My first project is to rewire and change the humbuckers in a LP style guitar. I have everything ready to go but lo and behold when I look inside the guitar, the wiring is COMPLETELY different to how I'd planned to do it. After much searching around I realise there are lots of ways to wire this thing. If you would be kind enough to look at the schematic I made and tell me if it will work, you will save me a lot time unsoldering everything if it is incorrect.

thanks

Stephen
Attachments:
schematic.jpg
#3
It all seems to be fine, just I'm not sure about how the ground is going to the output jack - I'm not familiar with LP switches though, so this might just be my lack of knowledge
#4
Put it together this afternoon and it sounds sweet. soldering looks like it was done by an 8yr old, but there has to be a learning curve right?