#1
I was adjusting the pickup height on my PRS ce22 (2 covered humbukers with mounting rings) to see the difference on string vibration between extreme high and extreme low pickup height. Well I adjusted the pickup too low and it kinda went "clunk". Now the screws don't adjust the height, they just spin. The pickup still works fine, it is just stuck in a very low position. What can I do? Ideally I don't want to take all the strings off as I have just spent a few hours putting new strings on and setting it up. Thanks in advance.

Miracle_Man
What's the difference between a chickpea and a lentil?
I've never paid to have a lentil on my face!
#2
You've wound the screw out of the pick up. Unscrew the pick up ring and take it off. Pull the pick up out of the hole and put the adjusting screw back through the ring, thr the spring and into the pick up.
Epi Les Paul Standard plus
w/ Seymour Duncan Sh-2n in neck and SH-4 in bridge
Vox Valvetronix
Dunlop Crybaby Wah
#3
It works now cheers
What's the difference between a chickpea and a lentil?
I've never paid to have a lentil on my face!