#1
What kind of pots should I get for these pickups? Just need one volume pot. Thanks.
Gear

93 Jackson Dinky Professional Reverse
98 Jackson Kelly KE3

Peavey Bandit 112
Custom 2x10 cab w/Bugeras
#2
humbucker or single?

Humbucker = 250k
Single = 500k

I think... I tend to mix them up, but as for the type, you'll want logarithmic for volume.
------

Shwiggity.
#3
I think 250k is right
because EMGs need different pots that are 500k
so 250k would make sense.
Gear

93 Jackson Dinky Professional Reverse
98 Jackson Kelly KE3

Peavey Bandit 112
Custom 2x10 cab w/Bugeras
#4
I dont know anything about bill L pickups, but in general-

single coils - 250k
Humbuckers - 500k
Active pickups - ~25k
Quote by SomeoneYouKnew
"If I said you had a beautiful body, would you hold it against me?"
#5
^Yes

Humbuckers are 500k.
Single coils are 250k.
EMGs are 25k.

For volume, you also want to look for a logarithmic pot(also called audio taper pot) You can use a linear taper as well, but the audio taper will give you a much more natural sounding increase (ie. it doesnt jump from 2-10)
#6
damnit. i can't remember anything when i'm hung over.

And EMG's use 50k pots, not 500
------

Shwiggity.
#8
Oh alright thanks fellas
Gear

93 Jackson Dinky Professional Reverse
98 Jackson Kelly KE3

Peavey Bandit 112
Custom 2x10 cab w/Bugeras
#9
Quote by shredforbread33
I think 250k is right
because EMGs need different pots that are 500k
so 250k would make sense.


emgs need 25k pots

humbuckers need 500k pots
singles 250

well dont need but is recommended, also make sure there log taper and not linear
Quote by Deliriumbassist
Antisocial Behaviour Order. A chav's equivalent of GCSEs.