#1
Hey everyone, I'm going to be putting a Seymour Duncan Hotrail into the bridge position in my Telecaster. And I'm wondering how I'm going to do this, how difficult it will be and such, I've had soldering expierience so that's not the problem, I'd just like some help anyone has for me. Thanks a lot.
Yamaha Pacifica 012 W/Emg 81
ESP EC400
ESP H202
Squier Tele Standard
Strat Copy
Randall RG100SC
Boss MT2
Boss TU2
#2
You will get fitting instrucions in the box with the pickup!!
The Hardest part is removing the bridge and making sure it all goes back together correctly!!
#4
Thanks for that diagram, I forgot to mention that I'm keeping the original neck pickup, will this diagram still work? And I should probly change the pots to better ones shouldn't I? Thanks!
Yamaha Pacifica 012 W/Emg 81
ESP EC400
ESP H202
Squier Tele Standard
Strat Copy
Randall RG100SC
Boss MT2
Boss TU2
#5
It'll work just fine if you don't replace the Neck pup.


You don't have to change the pots, it hardly, if at all, makes a change in your sound.