#1
Firstly I have used the search button and cant find anything, looked at google and on seymour duncan site but no luck.

Right,

Standard les paul wiring, 2 Humbuckers, 2 tone, 3 way switch.

I wanna use a 2 way mini switch that will spit both pickups from humbucker to single coil, Is it possible and can anyone help me out with a diagram?

Both humbuckers are 4 conductor so thats not an issue.

Thanks in advance . . . . . . .
#6
if you can find a diagram for 2 humbuckers, 2 volume, 2 tone, 3 way, 1 push pull it'll work.

DPDT mini toggles are set up the same as push pull pots so in that diagram the box with the red and white wires going to it would be the mini toggle.
i used to be a mod, then i took an arrow in the knee.
Last edited by mikeyElite at Nov 26, 2008,
#7
Use the wiring diagram Sashki gave you, but instead of two push-pull pots use one DPDT switch, and connect one of the push-pull pot's wires to the left half of the switch, and the other push-pull pot's wires to the right half. That will act like a "master-splitter."
Gear:
Schecter Hellraiser Deluxe
Boss DS-1
Crate GTD65

GAS List:
Mesa Boogie Dual Rectifier Roadster