Phonic Powerpod 1060 Pa/Mixer/amp + 2x15" Peavey PA speakers (600watt, 10 Bal in)

#1
Barely used (litterally 5-6 times, and never pushed)
Amp details and manual are below.
Amp/Mixer is in immaculate condition. Speakers are perfect working order with the odd cosmetic mark on the casing.
£250 ONO for the lot.

Live in Newport, South Wales, but willing to meet in any area this side of London and Birmingham. (gloucester, reading, swindon, bristol, etc)




"Since their introduction the Powerpod Series of powered mixers have become established as one of the most popular compact PA solutions available in the market today. The combination of attractive styling, plentiful features and realistic pricing ensures the Powerpod's enduring popularity.

The Powerpod 1060 takes the concept of the incredibly popular Powerpod 740 a stage further offering increased facilities and flexibility. Eight balanced mic inputs, ten line level inputs, built in digital effects and three separate 200 Watt power amplifiers combine to offer the perfect solution for all manner of PA requirements. The three separate power amplifiers enable the Powerpod 1060 to be run in two separate modes.
Mode 1: Stereo front of house (200 Watts per channel) and mono monitoring.
Mode 2: Mono front of house (400 Watt mono) with mono monitoring (200 Watts). When the job requires power and flexibility the economically priced Powerpod 1060 fits the bill.


Features:

* 8 balanced mic inputs
* 10 balanced/ unbalanced TRS 1/4" jack line inputs
* Gain, 3-band EQ and pan controls on all input channels
* Tape input/ record output via RCA (phono) connectors
* Built-in digital reverb/ delay
* Three separate 200 Watt power amplifier modules
* Two separate 7-band graphic equalisers, one for front of house, one for monitors
* Globally switchable 48V phantom power for powering condenser microphones
* Headphone amp with stereo 1/4" connector and dedicated level control


Technical Specifications:

* Dimensions: (W x H x D mm) 470 x 280 x 325
* Weight: 21kg"

Manual -