#1
Hey I recently got an Ibanez S2170 PCM and it came setup with 9's gauge strings. I decided to restring the guitar today with a set of 10's. I had a few problems reguarding the Zr bridge.

The first problem was that the screws on the Zr bridge that are used to loosen or tighten the strings in place were extremely tight and I had to put loads of force into it, to loosen them. Should it be like this or did it come setup wrong?

THe 2nd problem I encountered after replacing the strings was the action on the side of the B and higher E string is lower than the action on the lower E and A side. The Zr bridge is generally parallel with the body but appears to be lopsided if you look at the back.

Help and suggestions will be appreciated alot.

thankyou.

Ibanez S2170 Purple Chameleon finish
Vintage SG
Roland Microcube
Digitech overdrive
Digitech HEAVY METAL
Dunlop Crybaby
#2
anyone?

Ibanez S2170 Purple Chameleon finish
Vintage SG
Roland Microcube
Digitech overdrive
Digitech HEAVY METAL
Dunlop Crybaby