#1
While setting up for a show last week, I plugged in my DigiTech RP250 (amazing box), and the display showed something like "choose pedal." I pressed the two selection buttons, but regardless of which I pressed, the display read "error."

I unplugged it and left it sit for a few days, and now it works fine, except the pedal itself, whether it be set to volume, wah, or anything else, doesn't do anything.

I can't find anything in the users manual or online troubleshooting. How can I fix it?
Quote by Les_Frederiksen
PlayMadness, you give me hope for mankind.

Quote by Darksucker
PlayMadness - Jesus 2.0

Quote by genghisgandhi
Society's doing great. There's a rise of people like PlayMadness. I feel pretty good about the way things are going.
#3
Try a factory reset....

From page 40 of the manual...

"Factory Reset
This function resets the RP250 to its original factory settings. This procedure erases all custom User presets, and recalibrates the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All such data will be lost forever! Be sure you want to erase the memory and start fresh before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP250.
2. When the display prompts you with FACRST, release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until RSTORD appears in the display and release (The Factory Reset procedure takes approximately 20 seconds). The Expression Pedal calibration procedure now commences."
#4
Quote by 667
Try a factory reset....

From page 40 of the manual...

"Factory Reset
This function resets the RP250 to its original factory settings. This procedure erases all custom User presets, and recalibrates the Expression Pedal.
ATTENTION: Performing this function will erase all user-programmed data. All such data will be lost forever! Be sure you want to erase the memory and start fresh before continuing with this procedure.
The procedure for performing a Factory Reset is as follows:
1. Press and hold the Store button while powering up the RP250.
2. When the display prompts you with FACRST, release the Store button, which is now flashing.
3. Press and hold the flashing Store button for 3 seconds until RSTORD appears in the display and release (The Factory Reset procedure takes approximately 20 seconds). The Expression Pedal calibration procedure now commences."

I'll try this, I haven't really made any custom settings.
Quote by Les_Frederiksen
PlayMadness, you give me hope for mankind.

Quote by Darksucker
PlayMadness - Jesus 2.0

Quote by genghisgandhi
Society's doing great. There's a rise of people like PlayMadness. I feel pretty good about the way things are going.